user manual

24
Setting the V-Chip
1
Press MENU. The menu
screen will appear.
Then press
or to select
(LOCKS) menu.
2
Press ▲ or ▼ to display the
password entering mode.
3
Select and enter a password
(4 digits) using Number
buttons (0-9), then press
ENTER.
4
Enter the same password
again to confirm, then press
ENTER.
The password is now
registered and the LOCKS
menu will appear on the
screen.
To register a password
An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that
you may choose to exclude. The restriction applies to “TV RATING” and “MOVIE RATING” if this data is
transmitted. You may set this restriction separately. To use the V-Chip function, you must register a
password.
NOTES:
• If you forget the password,
contact Customer Service at 1-
800-289-0980 for assistance.
Your original remote control will be
required.
• To avoid forgetting the password,
write it down and keep in a safe
place.
“ ” appears instead of the number.
LOCKS
NEW PASSWORD
[0-9] : SELECT ENTER : SET
EXIT : END
LOCKS
NEW PASSWORD
[0-9] : SELECT ENTER : SET
EXIT : END
LOCKS
V-CHIP SET
NEW PASSWORD
:SELECT
:ADJUST
LOCKS
CONFIRM PASSWORD
[0-9] : SELECT ENTER : SET
EXIT : END
32D0101A_En_p24-27 1/17/07, 2:13 PM24