OWNER’S MANUAL R 32” TFT LCD DIGITAL TV WITH DVD PLAYER HDLCDVD325 TV/CABLE MODE SELECTION When shipped from the factory, the TV/CABLE menu option is set to the “CABLE” (Cable Television) mode. If not using CABLE, set this menu option to the “TV” position. IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL CUSTOMER SERVICE – 1-800-289-0980 ORION WEBSITE FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT www.orionsalesinc.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instruction. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit. 10cm Notes when mounting the LCD TV/DVD on a wall • When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the LCD TV/DVD and the wall.
Features LCD color TV With DVD/CD player Unique space saving design combines a 32” LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents Playback operation Before using your unit IMPORTANT SAFETY INSTRUCTIONS ..... 3 SAFETY PRECAUTIONS ............................ 4 IMPORTANT NOTICE ................................. 4 Features ....................................................... 5 Contents ....................................................... 6 Disc .............................................................. 7 Location of controls ...................................... 8 Remote control ......................................
Disc Playable discs Disc type and logo mark content Audio + Video (moving pictures) DVD Video Audio CD-DA The following discs are also available. • DVD-R/RW discs of DVD video format. • CD-R/RW discs of MP3. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors. • If you insert an irregular shaped disc, it may get stuck and cause a malfunction.
Location of controls Top EJECT button POWER button SKIP buttons INPUT button MENU button STOP button VOLUME UP/DOWN buttons PLAY button CHANNEL UP/DOWN buttons Front Remote sensor POWER indicator Left Side Right Side DISC slot Headphone jack S-VIDEO AUDIO (L/R)/VIDEO IN (VIDEO2) jacks 8 5X10101A[EN] P05-12 8 3/2/06, 4:01 PM
Location of controls (continued) Rear CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: SHOCK HAZARD-DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
Remote control Page POWER DISPLAY Power On/Off 14,15,38,39 Call TV information 16,20 Call DVD information 38 TV/DVD Switch between TV/AV and DVD 14,38,39 5 (EJECT) Eject a disc 39,56 0-9 Direct channel selection of TV 15 Input setting 23,26,41,42,45,47 Enter a password 19~21,54~56 VOL +/– Adjust volume of TV 15,16 MUTE Switch off the sound 16,20 SLEEP Sleep timer 16 SETUP/TV MENU TV mode - Display menu of TV 14,17~26,28~37 DVD mode - Call up initial setup mode 43,44,51~55,57 DVD MENU Display DVD menu 50 CH
Remote control (continued) Inserting Batteries 1 Open the battery compartment cover in the direction of the arrow. Install two “AAA” batteries 2 (supplied), paying attention to 3 Replace the compartment cover. the polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 13 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack Antenna Jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Setting the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen displays. 1 Press POWER to turn on the unit. 2 Press TV/DVD to select the TV mode. 3 Press SETUP/TV MENU. The TV menu screen will appear. 4 Press or to select (SETUP) menu. SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE A U T O C H M E M O RY ADD/DELETE :SELECT :ADJUST 5 Press ▲ or ▼ to select “LANGUAGE”.
TV operation 1 To turn on the unit, press POWER. 2 Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases. 3 Set the TV/CABLE menu VOLUME 32 TV - VHF/UHF channels CABLE - CABLE TV channels option to the appropriate position (see page 17). the Direct Channel Selection 4 Press buttons to select the channel.
TV operation (continued) CH / Press and release CH or . The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 17 and 18 “Memorizing channels”. ANT ABCD 12 DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, press once, the digital information will appear.
Memorizing channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. This TV can receive up to 250 VHF/UHF channels and 500 cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
Memorizing channels (continued) Automatic memory tuning 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press or to select (SETUP) menu, then press ▲ or ▼ to select “AUTO CH MEMORY”. SETUP LANGUAGE CLOCK SET TV/CABLE A U TO C H M E M O RY ADD/DELETE ENGLISH CABLE :SELECT :ADJUST 3 Press or . The unit will begin memorizing all the channels available in your area.
Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or picture that you may choose to exclude. The restriction applies to “TV RATING” and “MOVIE RATING” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register password 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press or to select (LOCKS) menu.
Setting the V-Chip (continued) To set the V-Chip 1 Press SETUP/TV MENU in the TV mode. Then press or (LOCKS) menu. LOCKS to select V- C H I P S E T N E W PA S S WO R D :SELECT :ADJUST 2 Press ▲ or ▼ to display the password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. LOCKS PA S S WO R D [0-9] : SELECT ENTER : SET EXIT : END 3 Press ▲ or ▼ to select “TV RATING”. Then press or the desired rating.
Setting the V-Chip (continued) To change the password SETUP/TV MENU in the TV mode. 1 Press The TV menu screen will appear. 2 Press or to select (LOCKS) menu. LOCKS V- C H I P S E T N E W PA S S WO R D :SELECT :ADJUST 3 Press ▲ or ▼ to display the password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. LOCKS PA S S WO R D [0-9] : SELECT ENTER : SET EXIT : END 4 Press ▲ or ▼ to select “NEW PASSWORD”, then press or .
Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press DISPLAY. You can choose any four characters to identify a channel. To create channel labels 1 Select a channel you want to label. SETUP/TV MENU in the 2 Press TV mode, then press or to (OPTION) menu. select Press ▲ or ▼ to select “CH LABEL”, then press or . The CH LABEL menu will appear.
Selecting the video input source/ Labeling the video input source Selecting the video input source Press INPUT SELECT to view a signal from another device connected to your TV, such as a VCR or DVD player.You can select ANT, VIDEO1, VIDEO2, COMPONENT or HDMI depending on which input jacks you used to connect your devices. SOURCE SELECTION 0. 1. ANT VIDEO1 2. VIDEO2 3. COMPONENT 4. HDMI [0-4] : SELECT Pressing INPUT SELECT on the remote control displays the current signal source.
Setting the clock You must set the clock correctly for the “ON/OFF TIMER” to activate at the correct time. EXAMPLE: Setting the clock to “8:30 AM”, 25th (SAT) March, 2006. SETUP/TV MENU, 1 Press then press or to select (SETUP) menu. SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE CABLE A U T O C H M E M O RY ADD/DELETE :SELECT :ADJUST 2 Press ▲ or ▼ to select “CLOCK SET”. Then press or . The CLOCK SET menu will appear.
Setting the on timer This feature allows you to have the TV automatically turn on at a predetermined time. If you program the ON TIMER to daily once, the TV will turn on everyday at the same time to the same channel. EXAMPLE: Turning on the TV to channel 12 at 7:30 AM, daily. Preparation: Set the clock, if you have not already done so (see page 24). 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press or to select (OPTION) menu. Press ▲ or ▼ to select “ON TIMER”.
Setting the picture size You can view 480i and 480p format programs in a variety of picture sizes—NATURAL, CINEMA WIDE1, CINEMA WIDE2, CINEMA WIDE3, and FULL. Selecting the picture size 1 Press SETUP/TV MENU. Press or to select (SETUP) menu. Press ▲ or ▼ to select “PICTURE SIZE”. SETUP CLOSED CAPTION OFF CC ADVANCED PICTURE SIZE PICTURE SCROLL : SELECT or . The PICTURE 2 Press SIZE menu will appear.
Setting the picture size NOTE: The PICTURE SIZE feature is not available for some program formats (such as 1080i or 720p). Such formats will display in FULL. (continued) CINEMA WIDE2 picture size (for letter box programs) The entire picture is uniformly enlarged—it is stretched the same amount both wider and taller (retains its original proportion). The top and bottom edges of the picture may be hidden. To view the hidden areas, it is possible to make the picture scroll (see page 28).
Setting the picture scroll You can scroll the picture in CINEMA WIDE2 and CINEMA WIDE3 1 Press SETUP/TV MENU in CINEMA WIDE2 or CINEMA WIDE3 mode. Then press or to select SETUP LANGUAGE ENGLISH CLOCK SET (SETUP) menu. TV/CABLE CABLE A U T O C H M E M O RY ADD/DELETE :SELECT :ADJUST 2 Press ▲ or ▼ to select “PICTURE SCROLL”. SETUP CLOSED CAPTION OFF C C A D VA N C E D PICTURE SIZE PICTURE SCROLL : SELECT : ADJUST 3 Press or to display the SCROLL ADJUSTMENT mode.
Selecting the cinema mode/Using the aspect feature/ Adjusting the back lighting feature To set the CINEMA MODE to FILM A smoother motion may be obtained by setting the Picture Mode to Film when you view a DVD. Press SETUP/TV MENU in the TV mode, then press 1 select (SETUP) menu. or to ▲ or ▼ to select CINEMA 2 Press MODE, then press or to SETUP select “FILM”. CINEMA MODE ASPECT 3 FILM / VIDEO ON SIGNAL METER BACK LIGHTING Press EXIT to return to the normal screen.
Adjusting the picture preference/Picture control adjustment You can select four picture modes—SPORTS, STANDARD, MOVIE, and MEMORY—as described in the following table: Adjusting the picture preference 1 Press SETUP/TV MENU in the TV mode, then press or (PICTURE) menu. to select PICTURE P I C T U R E P R E F E R E N C E S P O RT S BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 25 50 25 0 25 :SELECT :ADJUST ▲ or ▼ to select 2 Press “PICTURE PREFERENCE”.
Selecting the color temperature/ Resetting your picture adjustments Selecting the color temperature Change the picture quality by selecting from three preset color temperatures—COOL, MEDIUM, and WARM: 1 Press SETUP/TV MENU in the TV mode, then press or to (PICTURE) menu. select PICTURE P I C T U R E P R E F E R E N C E S P O RT S BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 25 50 25 0 25 :SELECT :ADJUST ▲ or ▼ to select “COLOR 2 Press TEMPERATURE”. Press or you prefer.
Closed Caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language. Generally, Closed Captions in English are transmitted on C1 and Closed Captions in other languages are transmitted on C2.
CC advanced Closed Captions are factory preset however you can adjust them individually as follows: This feature is designed to customize Digital Captions only. 1 Press SETUP/TV MENU. The menu screen will appear. Press or to select 2 (SETUP) menu. SETUP LANGUAGE ENGLISH CLOCK SET TV/CABLE AUTO CH MEMORY ADD/DELETE 12:00 AM CABLE :SELECT ADD :ADJUST ▲ or ▼ to select “CC 3 Press ADVANCED”, then press . The CC ADVANCED menu will appear.
Selecting stereo/Second Audio Program (SAP)/ Sound control adjustment/Turning off the built-in speakers The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information. When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” displays onscreen every time you turn the TV on, change the channel, or press DISPLAY.
Using the WOWTM surround sound feature/Selecting the HDMI audio input source/Selecting the digital output Using the WOWTM surround sound feature WOW is a special combination of SRS Labs audio technologies that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. WOW consists of three features; SRS 3D, FOCUS, and TruBass. STEREO mode (see “Selecting stereo/Second Audio 1 Select Program (SAP)” on page 34).
Selecting the audio language/Resetting your audio adjustments Selecting the audio language When two or more audio languages are included in a digital signal, you can select one of the audio language. 1 Press TV SETUP/MENU, then press or to select (AUDIO) menu. AUDIO MTS BASS TREBLE BALANCE SPEAKERS :SELECT STEREO 25 25 0 ON :ADJUST 2 Press ▲ or ▼ to select “AUDIO LANGUAGE”. Then press or to display the AUDIO LANGUAGE menu.
Checking the Digital-signal strength This unit will allow you to view the digital signal meter for digital channels. 1 Press TV SETUP/MENU, then press or to select (SETUP) menu. SETUP LANGUAGE CLOCK SET TV/CABLE AUTO CH MEMORY ADD/DELETE :SELECT ENGLISH CABLE :ADJUST 2 Press ▲ or ▼ to select “SIGNAL METER”. SETUP SIGNAL METER : SELECT : ADJUST 3 Press or to check the Digital-signal strength. SIGNAL METER CHANNEL (DIGITAL) 123-045 80 4 Press EXIT to return to the normal screen.
Preparation/Status display of disc The following pages describe the setup/operation in DVD mode. Preparation Before DVD/CD operation, please make preparations as follows. the AC cord plug into a standard 120V 60Hz polarized 1 Insert AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER. NOTE: When connecting to other equipment, unplug the unit from the AC outlet. POWER on the unit or on the remote control to turn on 2 Press the unit.
Playback procedure 1 Press TV/DVD to select DVD mode. the disc in the disc 2 Place slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. the screen, “No Disc” 3 On changes to “Reading” and No Disc then playback will commence. • A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, , , , or press ENTER to operate a menu feature.
Special playback NOTE: There may be a slight delay between when you press the button and the function activating. Fast Forward Playback Press SEARCH during normal playback. Each press of SEARCH search (CD: (x 2), (x 2), will increase the speed of the (x 4), (x 8), (x 4), (x 8), (x 15). (x 20)) • To resume normal playback, press PLAY. Review Playback Press SEARCH during normal playback. will increase the speed of the Each press of SEARCH search (x 2), (x 4), (x 8), (x 15).
MP3/WMA/JPEG playback This player can play back MP3/WMA/JPEGdata which has been recorded on CD-R or CD-RW. To produce MP3/WMA/JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/JPEG-encoding software (not supplied). The Apple-HFS-System cannot be played. MP3/WMA/JPEG CD information Limitations on MP3/WMA/JPEG CD playback • MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digit extension letters, “mp3”, “wma”, “jpg”.
MP3/WMA/JPEG playback (continued) JPEG CD playback 1 Insert a disc to play. Hold the disc without touching either of its surfaces, position it with the label side to be played facing forward (If the disc has a label), align it with the guides, and place it in position. Place the disc in the disc slot. will appear on the TV 2 “Reading” screen. Reading time will de- Reading pend on the number of files on the disc. screen will appear 3 Aonfilethemenu TV screen. Press or to select a folder.
Setting the JPEG interval You can continuously play back all JPEG files automatically. 1 Press SETUP/TV MENU in the stop mode. Press or to select option, then press or ENTER. /Enter/Setup/Return or to select 2 Press “JPEG Interval”. TV Screen 16:9 Display On Picture Mode Auto JPEG Interval Off Select Files All /Setup/Return 3 Press ENTER or / to select your desired time. Off: Plays back one file at a time.
Setting the select files When playing back a CD containing a mixture of MP3, WMA and JPEG files, only MP3/WMA or JPEG files will be displayed on the file menu. 1 Press SETUP/TV MENU in the stop mode. Press or to select option, then press or ENTER. /Enter/Setup/Return 2 Press or to select “Select Files”. TV Screen 4:3 Display On Picture Mode Auto JPEG Interval Off Select Files All /Setup/Return 3 Press ENTER or / to select your desired file type. All: Displays all files.
Zooming/Locating desired scene Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. ZOOM during 1 Press playback. 1 The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM magnification 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). / / / to view a different part of the frame. 2 Press You may move the frame from the center position UP, DOWN, LEFT or RIGHT.
Repeat playback Title, Chapter, Track Playback 1 Press PLAY MODE during playback or stop mode. DVD Repeat : Off Audio-CD Play Mode : Off Repeat : Off /Enter/Play Mode ENTER to select “Chapter” or “Title”. 2 •Press In case of Audio-CD, first press to select “Repeat” and then press ENTER to select “Track” or “All”. DVD Repeat : Chapter Audio-CD Play Mode : Off Repeat : All /Enter/Play Mode 3 Press PLAY MODE again to make the screen disappear. • Press PLAY to start Repeat playback.
Program playback/Random playback (CD) Program playback You can arrange the order of tracks on the disc. PLAY MODE in the stop 1 Press mode. Play Mode : Repeat Off : Off /Enter/Play Mode or to select “Play 2 Press Mode”, then press ENTER to Play Mode : Program select “Program”. 4 7 10 2 5 8 11 9 12 3 6 Clear Enter as 7 ,3 ENTER. “Program Playback” will appear on the screen. The program you selected will begin to playback in the order set.
Marking desired scenes The TV/DVD stores the points that you want to watch again. You can resume playback from that scene. Marking the Scenes MARKER during 1 Press playback. the blank Marker 2 Select or , then using press ENTER at the desired scene. 1 2 3 Marker 1 00 27 54 Marker 2 Marker 3 /Enter/Cancel/Marker • Up to 3 scenes can be selected. • Repeat this procedure to set the other 2 scenes. 3 Press MARKER to remove this display.
Changing soundtrack language/Subtitles Changing soundtrack language You can select the language when you play a multilingual disc. AUDIO during 1 Press playback. 1/8 Eng D The current soundtrack language will appear. AUDIO repeatedly 2 Press until the desired language 2/8 Fra D is selected. The on-screen display will disappear after a few seconds. Subtitles Turning the subtitles on and off When playing back a disc recorded with subtitles, you can turn the subtitles on or off.
Changing angles/Title selection/DVD menu Changing angles When playing back a disc recorded with multi-angle facility, you can change the view angle. 1 Press ANGLE during playback. 1/9 The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. Title selection Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. TOP MENU during playback. 1 Press Title menu appears on the screen.
Setting the aspect ratio of TV screen/Setting on screen display Setting the aspect ratio of TV screen You can select the aspect ratio of the picture. SETUP/TV MENU in the 1 Press stop mode or No Disc. Press option. or to select /Enter/Setup/Return 2 Press or or ENTER, then press to select “Tv Screen”. TV Screen 4:3 Display On Picture Mode Auto JPEG Interval Off Select Files All /Setup/Return Press or o select your de3 sired screen type.
Setting the Picture mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Setting the Picture mode SETUP/TV MENU in the 1 Press stop mode or No Disc. Press option. or to select /Enter/Setup/Return 2 Press or or ENTER, then press to select “Picture Mode”.
Dynamic Range Control DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment. SETUP/TV MENU 1 Press in the stop mode or No Disc. or Press option. to select /Enter/Setup/Return Press or ENTER to 2 select “DRC”. DRC On /Setup/Return or to select 3 Press “On” or “Off”, then press ENTER. DRC Off /Setup/Return On : Loud sound such as explosion or similar is toned down slightly when play back.
Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1 Press SETUP/TV MENU in the stop mode or No Disc. /Enter/Setup/Return or to select 2 Press option. Then press or ENTER. Press to select “Parental”, then press or until the level you require appears. Password ---- Parental 3 /Setup/Return • Level Off : The parental control setting does not function. • Level 8 : Virtually all DVD software can be played back.
Changing the parental level SETUP/TV MENU in 1 Press the stop mode or No Disc. Press or to select option. Then press or ENTER. Password ---- Parental 3 /0-9/Enter/Cancel/Setup/Return 2 Press Number buttons (0-9) to enter the password you have stored. Password 1234 Parental • If you input a wrong number, press CANCEL. 3 /0-9/Enter/Cancel/Setup/Return ENTER. 3 Press The rating is now unlocked.
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. 1 Load a DVD disc (see page 39). the DVD disc has been designed to temporarily cancel the 2 IfRating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with ENTER key, “Your disc exceeds the parental control level 1.” (e.
Setting the language You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. SETUP/TV MENU in the 1 Press stop mode. Press option. or to select /Enter/Setup/Return or ENTER. 2 Press Then press or to select “Menu”. Menu Subtitle Audio English English English /Setup/Return or to select your 3 Press desired language (e.g. English).
Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 57).
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
Connections to other equipment (continued) To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV/DVD’s remote control. To control the audio, turn on the TV/DVD and the stereo amplifier, and turn off the TV/DVD’s built-in speakers (see “Turning off the built-in speakers” on page 34). Amplifier To VARIABLE AUDIO OUT jacks.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. TV/DVD does not operate. 11 TV BROADCAST RECEPTION Poor sound or no sound.
Problems and troubleshooting SYMPTOMS (continued) POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 39 7 7 No picture. • TV/DVD selector is not set correctly. 38 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier.
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: TELEVISION Type: Display method: Number of Pixels: Viewing angle: Tuner type: Receiving channels: Input: Digital audio out: Component video input: HDMI input: Antenna input: Speaker: Audio output power: DVD/CD player Signal system: Applicable disc: Pickup: ACCESSORIES: AC 120V 60Hz Operation: 190W Stand by: 1W 19 kg (41.
R limited WARRANTY 32” TFT LCD TV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 90 days from date of original purchase in the United States.
MEMO ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Printed in Thailand J5X10101A SH 06/02 N 5X10101A[EN] P61-Back 68 3/2/06, 4:07 PM