OWNER’S MANUAL GUIDE D’UTILISATION FRANÇAIS ENGLISH 24” CLASS LED-LCD HDTV WITH DVD PLAYER LED-LCD HDTV CATÉGORIE 24 PO ET LECTEUR DVD SLEDVD249 ATTENTION ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFETY INSTRUCTIONS 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
IMPORTANT SAFETY INSTRUCTIONS 23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 4 inches (10 cm) free space around the entire unit.
How to attach the stand NOTE: • Unplug the AC cord from the wall outlet. • Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction. Hold the unit and attach the stand frame slowly, as shown in figure 1.
Features LCD color TV With DVD/CD player Unique space saving design combines a 24” LED-LCD HDTV color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 IMPORTANT NOTICE .......................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 Features............................................................7 Contents ...........................................................8 Disc...........................................................
Disc Playable discs Disc type and logo mark DVD Video CD-DA content Audio + Video (moving pictures) Audio The following discs are also available. • DVD-ROM/-R/-RW/-R DL discs of DVD video format. • CD-ROM/-R/RW discs of MP3/WMA/JPEG. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM (for PC), CD-ROM (for PC), SVCD, CVD, VCD, etc. cannot be played. • This unit cannot play an 8 cm disc. It cannot also be played even using a disc adapter.
Disc ■ Compatibilities for the PC-created disc • You may not be able to play discs recorded using a personal computer or recorder for disc compatibilities, scratches or marks on the disc, dirty lenses of the unit or condensation and so on. • Discs recorded using a personal computer may not be playable in this unit due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.
Parts and functions Front Right side EJECT (0) button INPUT/ENTER button CH (CHANNEL) /▼/ PLAY (£) buttons VOL (VOLUME) +/–/▶/◀ buttons, MENU button POWER button Remote sensor Power Indicator Red: Standby To display the menu screen. Press and hold both VOL (VOLUME) +/– at the same time for 1 second to display the menu screen. CH (CHANNEL) buttons, VOL (VOLUME) +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations. ANT.
Remote control POWER Power On/Off DISPLAY/– Call TV information Call DVD information Input “–” for digital channels TV/DVD Switch between TV and DVD (EJECT) 0-9 Eject a disc Direct channel selection of TV Input setting Enter a password VOL +/– Adjust volume of TV MUTE Switch off the sound SLEEP Sleep timer SETUP/ TV MENU DVD mode - Call up initial setup mode TV mode - Display menu of TV DVD MENU Display DVD menu CH / Select channel of TV ▲▼◀▶ Cursor buttons ENTER Enter information in
Remote control Inserting Batteries the battery compartment two “AAA” batteries 1 Open 2 Install 3 Replace the compartment cover. cover in the direction of the arrow. (supplied), paying attention to the polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. Combination VHF/UHF Antenna (Single 75 ohm cable) Antenna Jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna Jack. 75 ohm Coaxial Cable Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box.
Starting setup TV operation The Auto Setup menu appears the first time you turn on the TV, and assists you to specify the Air/Cable setting, and program your channels automatically. 1 IMPORTANT: Make sure that the antenna or cable TV system connection is made! 1 To turn on the TV, press POWER (It may take approx. 10 seconds for a picture to appear on screen.). The Auto Setup function begins.
To select the video input source To view a signal from another device connected to your LCD TV, such as a VCR player, press INPUT SELECT, then press ▲ or ▼ or corresponding Number buttons (0-5), then press ENTER. / Press and release CH / . The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See “Memorizing channels” on page 18. DISPLAY Press DISPLAY to display the current information on the screen.
Convenience functions You can change the default settings by pressing the TV MENU button on your remote, then select the one of the icons at the left of the menu - follow the On-Screen prompts to set your preferences.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode. Air/Cable selection 1 2 Select “Channel ⇒ Auto Ch Memory ⇒ Signal Type”.
Checking the digital signal strength This TV will allow you to view the digital signal meter for digital channels. 1 2 Select “Channel ⇒ DTV Signal”, then press ▶ or ENTER. The digital signal strength screen will appear. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. CH DTV Signal 0 50 100 Signal Level NOTE: • Signal meter feature is not available for analog channels. • After 240 seconds, DTV Signal screen will return to normal TV operation automatically.
Setting the V-Chip When you select TV-Y7, TV-PG, TV-14 or TV-MA, press DISPLAY to explain the rating. Genre: D : Dialogue L : Language S : Sex V : Violence FV : Fantasy Violence An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password.
NOTE: • You can only download the additional V-Chip rating system when your TV is receiving a digital signal. • When you download the additional rating system, it may take some time for the download to occur. • The V-Chip rating information and system are not determined or controlled by the TV. • The standard V-Chip rating system is available whether your TV is receiving a digital signal or not, and will block both analog and digital programs.
You can select from among the following items and parameters.
DVD Operation 3 The following pages describe the setup/ operation in DVD mode. Preparation Before DVD/CD operation, please make the following preparations. 1 2 3 4 Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER. NOTE: • When connecting to other equipment, unplug the unit from the AC outlet. Press POWER on the unit or on the remote control to turn on the unit.
Special playback 3 In the zoom mode, press ZOOM repeatedly to Fast Forward Playback Press SEARCH (uu) during normal playback. Each press of SEARCH (uu) will increase the speed of the search. • To resume normal playback, press PLAY ( ). NOTE: • You can select the Still Playback or Fast Forward (Review) Playback in the zoom mode. • Some discs may not respond to the zoom feature. Review Playback Press SEARCH (tt) during normal playback. Each press of SEARCH (tt) will increase the speed of the search.
Marking desired scenes The TV/DVD stores the points that you want to watch again up to 12 points. You can resume playback from each scene. Marking the scenes 1 Press MARKER during playback. 2 Select the blank Marker using ▲/▼/◀/▶, then press ENTER at the desired scene. • Up to 12 scenes can be selected. • Repeat this procedure to set the other 11 scenes. 3 Press MARKER to return to the normal screen. Returning to the scenes 1 Press MARKER during playback or stop mode.
Using HOME MENU Play mode Playing a disc A-B repeat playback A-B repeat playback allows you to repeat a selection between two selected points. 1 Press SETUP during stop mode. HOME MENU will appear. 2 Press ▲/▼/◀/▶ HOME MENU DVD to select “Disc Navigator”, then press ENTER. Audio Settings Video Adjust Play Mode Disc Navigator Initial Settings 3 Press ▲/▼ to select Disc Navigator during playback. Play Mode screen will appear.
Program playback 1 Press PLAY MODE during playback or stop mode. 4 Input Title, Chapter, Track or Folder number or Time by using Number buttons (0–9) and press ENTER. Play Mode screen will appear. 2 Press ▲/▼ to select “Program”, then press ENTER. 3 Press ▲/▼ to select “Create/Edit”, then press ENTER. “Create/Edit” display differs, depending on discs or files. Program Current Title:02 or Title 1-38 Chapter 1-004 01. 01 02. 03. 04. 05. 06. 07. 08.
Video Adjust menu From the Video Adjust menu you can adjust various settings that affect how the picture is presented. 1 Press SETUP during stop mode. HOME MENU will appear. 2 Press ▲/▼/◀/▶ to 3 Press ▲/▼/◀/▶ to setting the option, then press ENTER. You can change the default settings to customize performance to your preference. Setting procedure HOME MENU DVD select “Video Adjust”, then press ENTER.
Function Setup Setting Option Digital Audio Out settings Digital Out Dolby Digital Out DTS Out 96kHz PCM Out MPEG Out On Digital audio is output when playing a disc. Off Digital audio is not output when playing a disc. Dolby Digital Dolby Digital encoded digital audio is output when playing a Dolby Digital DVD disc. Dolby Digital > PCM Dolby Digital audio is converted to PCM audio before being output. DTS DTS encoded digital audio is output when playing a DTS disc.
Parental Control Level Change Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit. How to into the Parental Lock menu HOME MENU will appear. to select “Initial Settings”, then press ENTER. HOME MENU DVD Audio Settings Video Adjust Play Mode Disc Navigator Initial Settings 3 Press ▲/▼ to select “Options”, then press ▶ or ENTER. Then press ▶ or ENTER to enter the Parental Lock menu. select “Password”, then press ENTER.
Language Code List Language (Language code letter), Language code Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish (es), 0519 Chinese (zh), 2608 Dutch (nl), 1412 Portuguese (pt), 1620 Swedish (sv), 1922 Russian (ru), 1821 Korean (ko), 1115 Greek (el), 0512 Afar (aa), 0101 Abkhazian (ab), 0102 Afrikaans (af), 0106 Amharic (am), 0113 Arabic (ar), 0118 Assamese (as), 0119 Aymara (ay), 0125 Azerbaijani (az), 0126 Bashkir (ba), 0201 Byelorussian (be), 0205 Bul
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.
Connections to other equipment To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER TV/DVD does not operate. • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. 13 TV BROADCAST RECEPTION Poor sound or no sound.
Problems and troubleshooting SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start or disc ejects automatically. • • • • No disc is inserted. The disc may be dirty. Clean up the disc. The disc is scratched or warped. The unit cannot play CD-ROMs, etc. 23 9 9 9 No picture. • TV/DVD selector is not set correctly. 23 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier.
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: TELEVISION Type: Display method: Number of Pixels: Tuner type: Receiving channels: Inputs: Output: Speakers: Audio output power: DVD/CD player Signal system: Applicable disc: Pickup: ACCESSORIES AC 120V, 60Hz Operation: 42W Stand by: 0.7W 4.0 kg (8.8lbs ) Width: 550 mm (21-21/32 inches) Height: 349mm (13-24/32 inches) Depth: 137mm (5-25/64 inches) 5˚C - 40˚C Less than 80% RH 599.
limited WARRANTY 24” CLASS LED-LCD HDTV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States.