OWNER’S MANUAL GUIDE D’UTILISATION FRANÇAIS ENGLISH 26” TFT LCD DIGITAL TV WITH DVD PLAYER TÉLÉVISEUR NUMÉRIQUE AVEC ÉCRAN TFT À CRISTAUX LIQUIDES DE 26 PO ET LECTEUR DVD HDLCDVD265 ATTENTION ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ENGLISH 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
IMPORTANT SAFETY INSTRUCTIONS (continued) 23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.
SAFETY PRECAUTIONS ENGLISH The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
Features LCD color TV With DVD/CD player Unique space saving design combines a 26” LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 IMPORTANT NOTICE .......................................5 Features............................................................6 Contents ...........................................................7 Disc...................................................................8 Location of controls...........................................9 Remote control ...............................................
Disc Playable discs Disc type and logo mark DVD Video content Audio + Video (moving pictures) CD-DA Audio The following discs are also available. • DVD-R/RW discs of DVD video format. • CD-R/RW discs of MP3/WMA/JPEG. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors.
Location of controls ENGLISH Front POWER indicator Remote sensor Left side DISC slot EJECT button VOLUME +/– buttons CHANNEL /1 (PLAY) button CHANNEL /3 (STOP) button MENU button INPUT/ENTER button POWER button To display the menu screen. Press MENU button to display the menu screen. CHANNEL / buttons, VOLUME +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations. 9 52K0221A_eng.
Location of controls (continued) Rear side PC MONITOR IN jack VAR (VARIABLE) AUDIO OUT jack COAXIAL DIGITAL AUDIO OUT jack RF (ANT) IN jack AC INPUT jack HDMI 1/DVI IN jack HDMI 2 IN jack PC/DVI AUDIO IN jack COMPONENT IN jacks LINE 2 VIDEO IN jack LINE 1 IN jacks (VIDEO/S-VIDEO/AUDIO (L/R)) AUDIO (L/R) jacks (for COMPONENT IN and LINE2 VIDEO IN) 10 52K0221A_eng.
POWER Power On/Off DISPLAY/– Call TV information Call DVD information Input “–” for digital channels TV/DVD Switch between TV/AV and DVD (EJECT) 0-9 Eject a disc Direct channel selection of TV Input setting Enter a password VOL +/– Adjust volume of TV MUTE Switch off the sound SLEEP Sleep timer SETUP TV MENU TV mode - Display menu of TV DVD mode - Call up initial setup mode DVD MENU Display DVD menu CH ENGLISH Remote control / Select channel of TV ▲▼◀▶ Cursor buttons ENTER Enter in
Remote control (continued) Inserting Batteries the battery compartment two “AAA” batteries, 1 Open 2 Install cover in the direction of the arrow. paying attention to the 3 Replace the compartment cover. polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack Antenna Jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. ENGLISH If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Starting setup The Starting Setup menu appears the first time you turn on the TV, and assists you to select the menu language, specify the Air/Cable setting, and program your channels automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! 1 To turn on the TV, press POWER (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins.
CABLE CHART The chart below is typical of many cable system channel allocations. 3 4 Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER. Add/Delete Adding Channel Add/Delete Clear All NOTE: • It may take a few seconds for a digital channel picture to appear on screen after being selected. Automatic search 1 2 3 4 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER.
5 Press EXIT/CANCEL to return to the normal screen. TV operation 1 2 3 4 To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.) Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by blue bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of blue bars also decreases.
MUTE Press MUTE to switch off the sound. The TV’s sound will be silenced and “Mute” will appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or –. SLEEP To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP button (Off, 0h 10m, 0h 20m, ..., 2h 0m).
To register a password 1 2 3 Genre: ALL D L S V FV Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER. Select and enter your password (4 digits) using Number buttons (0-9), then press ENTER. : All : Dialogue : Language : Sex : Violence : Fantasy Violence Movie Rating Movie Rating Lock G PG PG-13 R NC-17 X * * *_ New Password : Select [0-9] : Select 4 “ ” appears instead of the number.
To download the additional V-Chip rating system (when available) 1 2 3 4 5 6 7 Press SETUP/TV MENU while on a digital channel. Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER. Use Number buttons (0-9) to enter your password, then press ENTER. The Lock menu will appear. Press ▲ or ▼ to select “V-Chip Set (DTV)”, then press ▶ or ENTER. If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed.
This is normal with Closed Captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing. • When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with Closed Captions. • Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
Selecting the picture size Brightness:25 5 After adjusting, press ENTER to return to the Picture Setting menu. Then continue to adjust the other items. ◀ Brightness decrease brightness Contrast decrease contrast Sharpness makes picture softer Color be pale color Tint be reddish color 6 ▶ increase brightness increase contrast makes picture clearer be brilliant color be greenish color After your desired setting, press EXIT/CANCEL to return to the normal screen.
Cinema Wide3 (for letter box programs with subtitles) To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom. The top and bottom edges of the picture may be hidden. 2 3 4 Press SETUP/TV MENU. The TV menu screen will appear. Press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Press ▲ or ▼ to select “PC Setting”, then press ▶ or ENTER. The PC Setting menu will appear.
Sound control adjustment 1 2 3 Press ▲ or ▼ to select “Audio” , then press ▶ or ENTER. Press ▲ or ▼ to select the item you want to adjust. 15 Bass 15 Treble Balance 0 MTS Surround Audio Language : Select Stereo Off No Info. : Adjust Bass: Press ◀ or ▶ to adjust the bass sound. Treble: Press ◀ or ▶ to adjust the treble sound. Balance: Press ◀ or ▶ to obtain an equal sound level from both speakers. Surround: Press ◀ or ▶ to select “On” or “Off”.
Selecting the HDMI audio input source 3 4 When you use PC/DVI AUDIO IN jack with HDMI or DVI device, you must select HDMI audio input source from “HDMI” or “DVI”. 1 2 3 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Audio”, then press ▶ or ENTER. Press ▲ or ▼ to select “HDMI 1 Audio”. Press ◀ or ▶ to select “HDMI” or “DVI”. Audio HDMI 1 Audio Speakers HDMI On Press ▲ or ▼ to select “Picture Setting”, then press ▶ or ENTER.
Resetting your settings Preparation The Reset function returns your settings to the factory settings. The following pages describe the setup/ operation in DVD mode. 1 2 3 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. Preparation Press ▲ or ▼ to select “Setup” , then press ▶ or ENTER. 1 Press ▲ or ▼ to select “Reset”. Before DVD/CD operation, please make the following preparations.
3 On the screen, “ ” changes to “Reading” and then playback will commence. • A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press ▲, ▼, ◀, ▶ or ENTER to operate a menu feature. Reading 4 5 Press STOP to end playback. • The unit memorizes the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).
• Music recorded by “Joliet Recording Specification” can be played back. • The music files recorded by “Hierarchical File System” (HFS) cannot be played. • The unit can play back baseline and progressive JPEG files. • MP3 or WMA files on the KODAK Picture CD are not recognized on this unit. Limitations on display • The maximum number for display is 15 characters. Long file names will be condensed.
Select Files The file type to make it display in the file browser can be chosen. 1 2 3 Press ◀/▶ to select “Select Files” at right column in the file browser. • Press ENTER, then press ▲/▼ to select file type from the list (Music or Picture). Press ENTER to add/remove check mark. Checked file type will be displayed in the file browser.
Repeat playback (CD) 2 1 2 3 In the file browser, press ▲/▼/◀/▶ to select “Repeat”. Press ENTER repeatedly to select “Track” or “All”. Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 WMA-3 3 Select Files Repeat :Track Mode :Off JPEG Preview Press PLAY. The unit automatically starts repeat playback after finishing the current track. To resume normal playback, select Repeat : “Off” in step 2. NOTE: • The repeat or random function is canceled when you eject the disc or turn the power off.
A-B Repeat Playback: A-B repeat playback allows you to repeat material between two selected points. 1 Press REPEAT A-B during playback. The start point is selected. Returning to the scenes: 1 2 3 Press REPEAT A-B again. The end point is selected. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. A B 3 To resume normal playback press REPEAT A-B again. “ Off ” appears on the screen.
Subtitles Title selection Turning the subtitles on and off Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during playback until “Off” appears. Off Changing the subtitle language You can select the language when playing back a disc recorded with multilingual subtitles.
English, Francais, Espanol : The selected language will be heard or seen. Other: Other language can be selected (see the “Language code list” on page 36). Original (Audio): The unit will select the first priority language of each disc. 4 Off (Subtitle): Subtitles do not appear. Press SETUP/TV MENU to remove the menu screen. NOTE: • If the selected language is not recorded on the disc, the first priority language is selected.
Auto: Select this position normally. The DVD player automatically detects source content, film or video, of playback source. Night Mode Digital Out : Off Off PCM Bitstream Film: Suitable for playback of film content pictures. 4 Video: Suitable for playback of video content pictures. NOTE: • Depending on the disc, pictures may be cut off or doubled. In this case, select “Video”. Night mode Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment.
Parental Password 1 2 3 4 5 6 7 8 Off • Level Off : The parental control setting does not function. • Level 8 : Virtually all DVD software can be played back. • Level 1 : DVD software for adults cannot be played back. 5 Press SETUP/TV MENU to remove the menu screen. Setting the new password: 2 3 4 Some pre-recorded DVD discs may attempt to temporarily cancel the rating level that you have set. You will be given the option to allow or not allow the override. 1 2 • Select from level 1 to level 8.
Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 32).
The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI 1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
Connections to other equipment (continued) This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page 25).
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER TV/DVD does not operate. • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. 12 ENGLISH Problems and troubleshooting TV BROADCAST RECEPTION Poor sound or no sound.
Problems and troubleshooting SYMPTOMS (continued) POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 26 8 8 No picture. • TV/DVD selector is not set correctly. 26 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. – 27 39 Picture is distorted during CUE or REVIEW.
GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: TELEVISION Type: Display method: Number of Pixels: Tuner type: Receiving channels: Inputs: Outputs: Speaker: Audio output power: DVD/CD player Signal system: Applicable disc: Pickup: ACCESSORIES AC 120V 60Hz Operation: 102W Stand by: 0.7W 8.8 kg (19.4 lbs) Width: 663 mm (26-1/8 inches) Height: 489 mm (19-1/4 inches) Depth: 214 mm (8-7/16 inches) 5˚C - 40˚C Less than 80% ENGLISH Specifications 26.
limited WARRANTY 26” TFT LCD TV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States.
Memo .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. ............