- Orion America Inc. DVD VCR Combo User Manual

Antenna connections
JDVD/VCR TO TV CONNECTION J
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow
the connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate UHF and VHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for UHF and VHF reception.
75 ohm coaxial cable (supplied)
TV
UHF/VHF IN
-...®
NOTE: If a UHF or VHF antenna is used,
set the TV/CATV menu option to
the "TV" mode.
TV with single 75 ohm UHF/VHF antenna
input
75 ohm coaxiaJ cable
(supplied)
Splitter
75 ohm input
75/300 ohm outputs
(not supplied)
TV
rUHF7
®®
J_I_VH F
"'*9
NOTE: If a UHF or VHF antenna is used,
set the TV/CATV menu option to
the "TV" mode.
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
75 ohm coaxial cable
(supplied)
Splitter
75 ohm input
300 ohm outputs
(not supplied)
TV
rUHF7
®®
_rVHF7
®®
NOTE: If a UHF orVHF antenna is used,
set the TV/CATV menu option to
the "TV" mode.
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
17
VRDVD4005 P02-P21 t7 03920, 2:37 PM