- Orion America Inc. DVD VCR Combo User Manual

Connections with the TV or audio component

Connect to a stereo amplifier with audio output

Youcan enjoy high quality audio by connecting the audio output to your amplifier.

Connect the audio outputjacksto any line-levelinputs (such as AUX, DVD, CD, etc.) ofan audio amplifier.

Audio (L) output

Audiocable (not supplied)

DVD/VCR Audio(R) output

Connect to an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems

such as Dolby Digital and DTS by using the optical or coaxial digital output.

Use this connection to connect an:

• AV amplifier with built-in *Dolby Digital decoder

• AV amplifier with built-in *DTS decoder

NOTE:

You may connect to a TV with a component

video cable (not supplied) or S-Video cable

(not supplied) instead of a video cable (not

supplied).

audio output

Video cab!o (not supplied) }t

ToVideo

intput

Coaxial digital

cable (not supplied)

DVDiVCR

AV Amplifierwithbuilt-invarious

deeoderas above

Connecting the optical digital cable

You may connect to an AV Amplifier with an optical digital cable (not supplied) instead of a coaxial digital

cable.

When you connect the optical digital cabfe (not supplied), remove the dust protection cap from the rear panel

When not using the optical digital cable, attach the dust protection cap to protect against duet.

NOTES:

• The DVD OUTPUT jacks (OPTICAL, COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT) are useful only

for DVD section.The VHS signal is output only from the composite jacks (DVD/VCR OUTPUT) and UHF/

VHF OUT.

• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV

amplifier, if you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the

speakers to be damaged.

• Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input

connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may

cause such a high level of noise that it may be harmful to your ears and damage your speakers.

• DTS audio will be output only from the OQAXIAL or OPTIOAL output. To hear DTS audio, DTS-Decoder is

necessary,

• When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs,

• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

VRDVD4005 PO2vP21 21 f}3 S.20, 2:37 PM