- Orion America Inc. DVD VCR Combo User Manual

Setting the disc

You can format, protect or finalize the disc.

Preparation:

• Turn ON theTV and set it to the video input mode.

• Select "DISC SETUP" from "SYSTEM SETUP". For

the procedure, see steps I to 3 in "Using the SETUP

MENU" on page 23.

REFORMAT

You can format a recorded DVD-RW.

Check the content of the disc before format. If you for-

mat the disc, the recorded content of the disc will be

erased.

To format a DVD in the video mode, select "REFOR-

MAT AS DVD VIDEO _,and to format it in the VR mode,

select "REFORMAT AS DVD VR'L

The screen below will appear.

• When you select "START" and press ENTER, format

will start, The screen below will appear,

• When you select "CANCE£' and press ENTER, the

DISC SETUP screen will appear.

NOTE:

Youcannot formatVer. 1.0 DVD-RW and DVD-R.

NEW DISC FORMAT

If you insert a blank DVD-RW, the disc is automatically

formatted.

Select "NEW DISC FORMAT '_and select the mode to

be used for automatic format from the list below.

VR: Format the DVD in the VR mode

Video: Format the DVD in the Video mode.

When you insert a blank DVD-RW, the following mes-

sage screen will appear.

• When you select "START" and press ENTER, format

will start. The screen below will appear.

• When you select "CANCEL:' and press ENTER, the

normal TV screen will appear.

NOTES:

• The automatic format is effective only for Vet. 1.1 or

later DVD-RW.

• Even if the recorded disc is inserted the above screen

may appear due to any scratch or contamination on

the disc. in this case, select "CANCEL

FINALIZE

When you finalize the disc recorded or edited by this

unit, you can playback the disc on other DVD players.

When "FINALIZE" isselected, the screen below will ap-

paa£

_DVD4005 P23-P32 27 f}3 g.20, 2:45 PM