- Orion America Inc. DVD VCR Combo User Manual

Setting the disc / Other SYSTE.SETop
NOTES:
• The finalization process may require a few minutes
to about 1 hour according to disc type or the amount
of free space on the disc.
• You can record or edit a finalized DVD-RW (in VR
mode) by cancelling the finalizing, but you cannot do
these operations with a DVD-RW (in Video mode) or
DVD-R.
• For a DVD-RW (in VR mode) which was finalized by
another unit, you can record or edit on this unit by
cancelling the finalization=
• You cannot playback a disc recorded on VR mode on
a unit that does not support DVD-RW.
• Even ifyou finalize a disc in the Video mode, the disc
cannot be played back in some DVD players.
PROTECT DISC
You can protect a disc to prevent the content recorded
on itfrom being erased, edited or re-recorded.
Only DVD-RW (in VR mode) can be protected.
Select "PROTECT DISC" and select "ON" to protect the
disc.
To cancel the disc protection, select "OFPL
NOTE:
You can format a disc even ifthe disc protection is "ON".
UNDO FINALIZE
You can cancel the finalization of a finalized DVD-RW
(in VR mode).
You cannot cancel the finalization for discs other than
above.You can record or edit on a disc whose finaliza-
tion has been cancelled=
Select "UNDO FINALIZE", and the screen below will
appear.
NOTES:
• The cancelling finalization process may require a few
minutes to about 1 hour according to disc type or the
amount of free space on the disc.
• When the disc's finalization cannot be canceUed, you
cannot select "UNDO FINALIZE".
You can turn the display window and screen dis-
play"ON" or "OFF".
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select'_OTHEW from "SYSTEM SETUP". For the pro-
cedure, see steps I to 3 in "Using the SETUP MENU"
on page 23.
DIMMER (Brightness of the display
window)
Set the brightness of the display window on the front
panel of this unit.
Select "DIMMER" and select the display window status
from the list below.
AUTOMATIC: When the power is on, the display win-
dow appears bright When the power
is off, it appears dark.
DIM: The window display always appears
dark.
OFF: When the power is on, the display win-
dow appears dark. When the power
is off, it is turned off.
DISPLAY/CALL (Turning the screen
display "ON" or "OFF")
You can turn off the screen display that isoutput to the
TV screen by this unit. Select "DISPLAY/CALL ', and
select "ON" or "OFF".
ON: The ecreen display appears.
OFF: Nothing but the SETUP MENU and error mes-
sages appear.
28
VRDVD4005 P23-P32 28 03.9._0, 2_5 PM