- Orion America Inc. DVD VCR Combo User Manual

Setting the
This section describes image quality settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select"AV SETUP 2"in _'AVSETUP_LFor the proce-
dure, see steps I to 3 in "Using the SETUP MENU"
on page 23.
image quality / Setting the audio
This section describes audio settings.
Preparation:
• Turn ON the TV and set it to tile video input mode.
• Select ,,AUDIO" from ,,AVSETUP"= For the procedure,
see steps I to 3 in "Using the SETUP MENU" on page
23.
BRIGHTNESS
You can control the brightness level of the image.
Select "BRIGHTNESS" and select the level from the
list below.
MAX: The image becomes brighter
STD: The image is of standard brightness.
MIN: The image becomes darker.
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
Select "DRC _and select the level from the list below.
MAX: Full dynamic range is increased.
STD: Full dynamic range is maintained.
MIN: Dynamic range is reduced.
NOTES:
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD.
VIRTUAL SURROUND (Spatializer N-
2-2 _)
Sound that is not recorded in the surround mode will
be changed to artificial surround sound and output.
Select "VIRTUAL SURROUND" and select "ON" from
the list to activate the virtual surround function. To not
use the virtual surround, select "OFF".
NOTE:
This function does not work with a video tape.
EXTERNAL AUDIO INPUT
The audio mode for the audio input jack can be se-
lected between stereo or monaural.
Select "EXTERNAL AUDIO INPUT" and select from the
list below.
STEREO: The sound is treated as stereo sound
L CH: The sound is treated as the monaural
sound of the left channel.
R CH: The sound is treated as the monaural
sound of the right channel.
3O
VF_VB4005 F'23-P_2 _0 03.9._0, 2_5 PM