- Orion America Inc. DVD VCR Combo User Manual

Stereo recording and playback
The VHS Hi-Fi audio system per-
mits high fidelity recording of MTS
STEREO TV broadcasts.
When a MTS STEREO broadcast is re-
ceived, the word '*STEREO" will appear on
the screen and the program can be viewed
or recorded in stereo.
The Hi-Fi STEREO recording procedure is
the same as for normal recordings.
NOTE:
When using a CATV system, stereo TV programs may be transmitted
over a mono cable channel. In this case the word "STEREO" will not
appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a prerecorded
Hi-Fi STEREO on video tape or disc, press AUDIO SELECT to select
how the audio will be heard through the speakers. Normally set to the
Hi-Fi STEREO position, this button can be set to the MONO position if
the stereo audio is of poor quality. The "R" and "If positions allow the
audio from the Right or Left Hi-Fi channel to be heard over both TV
speakers. This button has no effect when viewing a monaural audio
program. Each time when you press the button, output selection dis-
play appears on the screen for several seconds. Refer to the chart
below.
OUTPUT SOUND HEARD ON BOTH
SELECTION SPEAKERS
STEREO STEREO
L ch LEFT CHANNEL AUDIO
R ch RIGHT CHANNEL AUDIO
MONO MONO
NOTES:
• When playing back a video tape
or disc that is not recorded in Hi-Fi
stereo mode, the audio will auto-
matically be monaural.
• When listening to a Hi-Fi video
tape, disc or MTS broadcast
through the RF OUT (UHFiVHF)
jack (Audio/Video cord not con-
nected), the sound will be monau-
ral.
6O
VRDVD4005 P4_'-PS0 80 03.9._0, 2_.7 PM