- Orion America Inc. DVD VCR Combo User Manual

Dubbing a tape onto a disc
You can record video or audio on
a video tape onto a disc.
Preparation:
• Turn ON the TV and set to the video input mode.
• Load a source video tape and a disc for recording.
• Remove the erase protection tab of the source video tape to prevent
the data from accidentally being erased.
• Confirm the disc space before operation.
Press DVDNCR this unit DVD mode.
to set to
The DVD indicator will light.
Press REC MODE/SPEED and select the mode.
recording
• When REC MODE/SPEED is pressed each time, _'SP", "LP",
"SLP" or "XP" is selected in this order.
• The recording mode is indicated on both theTV screen and the
display window.
• For the details of the recording mode, see page 52.
Press DVD/VCR and set the unit to VCR mode.
_/1\"
NOTE:
Confirm that the VCR indicator lights.
4
Press DUBBING.
• The unit is changed to DVD mode automatically.
• The VCR is waiting for playback and the DVD is waiting for re-
cording. Then the following message will appear.
5
Press < or • to select "YES" and
press ENTER.
Dubbing starts.
• To cancel dubbing, select "NO"
and press ENTER.
NOTES:
• Dubbing cannot be carried out
when
- a copy guard supporting tape is
used.
- disc protection is set.
- disc has no recording space.
• Dubbing stops when
- the video tape is played back to
the end and stops.
- recording space becomes full
• The videos recorded from TV pro-
grams or movies can be used only
for your personal enjoyment with-
out permission of the copyright
holder.
76
In dubbing, VCR playback, DVD recording and "dub" (dubbing) in-
dicator appear on the display window.
t
d.b
Video playback
To stop dubbing, press
STOP.
DVD recording
VRDVD4005 P61-P78 78 03.9._0, 2:39 PM