- Orion America Inc. DVD VCR Combo User Manual

Dubbing using other equipment
You can connect another VCR or camcorderto dubbing.
Typical connection: When using this unit as a recording device
Pla_yback VOR
Playback Oamcorder
To AV jack
"AUDIOJVIDEO cord (supplied)
Recording VOR
_ ,1E _-i"1
Rscording VOR
mowd , mo odio ,
% Audio(L)iN
AUDIONtDEO cord (not supplied)
You can also connect to the audio/video input jack (L1) at the rear side
of this unit. In addition, each S-Video input jack at the front and rear
sides can be used for recording on the disc. (The S-Video input jack
cannot be used for recording on the video tape.)
When a video is recorded using this unit
Preparation:
• Turn ON the TV and set the unit to the video input mode
• Load a video tape where the erase-protection tab isnot activated or
a disc with enough recording space.
• To record onto a video tape, set the unit to VCR mode, whereas to
record onto a disc, set it to DVD mode.
Press INPUT SELECT and set the channel to L2 L1
(or ).
L1 (LINE 1): on the rear panel
L2 (LINE 2): on the front panel
Confirm that L2 (or L1) appears on the display window.
L2
NOTES:
• When this unit is used as a play-
back device, a mark or a charac-
ter displayed on the screen isalso
dubbed as an image. When the
screen display is set to OFF, see
"DISPLAY/CALL' on page 28.
• The videos recorded from the TV
programs or movies can be used
only for your personal enjoyment
without permission of the copyright
holder.
• The copy guard contents cannot
be used for dubbing.
78
Press REC MODE/SPEED and select the mode.
recording
VCR: SP or SLP (See page 48)
DVD: SP, LP, SLP or XP (See page 52)
Press REC/OTR on this unit, then press PAUSE/STILL
Press the PLAY button the then the
on
playback device, press
PAUSE/STILL button.
Release the recording pause and the playback still simultaneously
to begin the duplicating process.
To stop dubbing, press STOP.
VRDVD4005 P61-P78 _ 0&9._0, 2:3g PM