Specifications

SBIG ST-8300 Manual

11. After booting the camera Windows will bring up another copy of the

Wizard. The ST-8300 actually uses two drivers. One to boot the

camera and one to talk to it after it’s booted. We now need to walk

Windows through installing the second driver.

12. Repeat steps 8 and 9, again telling the FNHW to not check for updates

and to install automatically. At this point windows will show you the

Select the best match page:

13. Select the oem file not the sbig file (the second item above) by clicking

on it then click the Next button.

14. Windows will grind one last time copying the SBIG USB Camera

driver then show you the Completing the Found New Hardware

Wizard page.

Click the Finish button and pat your

self on the back. You’re done!

If you ever doubt that the camera is actually connected you can open the

Device Manager from the Hardware tab of the System control panel and

expand the Universal Serial Bus controllers section. You should see a

SBIG USB Camera listed there:

While you’ve got the System Control Panel open, if you want to restore the

Windows Driver Signing security check, click the Hardware tab, click the

Driver Signing button and select:

If Windows can not automatically find the drivers , tell it to Install from a

Specific Location and then browse to the folder:

C:\Program Files\SBIG\Driver Checker\SBIG Drivers