Specifications

SBIG STF-8300 Manual
Some of these may not exist on your system but delete the
ones that do.
3. Manually delete the old drivers files from the Device Manager.
a. In the Start menu, point to All Programs, point to
Accessories, and then click Command Prompt.
b. At the command prompt, type the following command ,
and then press ENTER:
set devmgr_show_nonpresent_devices=1
c. Type the following command a command prompt, and
then press ENTER:
start devmgmt.msc
d. In the View menu select the Show hidden devices
command.
e. Expand the Universal Serial Bus controllers section by
click on the adjacent “+”
f. For each of the items listed below, right click on the item
then select Uninstall:
”SBIG USB Camera", ”SBIG ST-402 Camera", “SBIG
USB Loader", “SBIG ST-L Loader", “SBIG ST-402
Loader"
g. Quit the Device Manager.
4. Install the new DriverChecker64 software.
a. Use the installer that came with your camera or download
it from our web site:
<www.sbig com>
5. Run the DriverChecker64 software.
a. From the Start menu select the DriverChecker64 item in
the SBIG folder.
b. Answer the question about your ST cameras.
6. Click the Update button to copy the new drivers to your system.
Link your old cameras to the new drivers.
a. For each type of SBIG Camera you own (ST, STL, ST-
402), power up the camera one at a time and then attach it
to the PC with the USB cable.
b. When the Add New Hardware Wizard comes up select
“No, not this time” when it asks if it can connect to
Windows Update then click Next.
c. Select “Install the software automatically” and click
Next.
8