Specifications

SBIG STF-8300 Manual
4. Run the Driver Checker application and it will ask you about any ST
Series Cameras (ST-7/8/9/10/2K) you may plan on using. Prior to
2006 the ST Series cameras had only an internal Tracking CCD. We
call this the Classic Model. In 2006 we added the Remote Guide Head
capability to the ST Series and we call it the Pro Model. The Driver
Checker needs to know whether your ST Series camera is a Classic
Model or a Pro model. For the STF-8300 and other models this section
does not matter. Select "Pro" and "Remember" to avoid seeing this
dialog box again.
5. After answering the Classic/Pro question above you'll see the following
dialog. The list of drivers shown may be different on your system but
it will generally indicate that no Installed Drivers were found and that
they all need to be updated.
6. Click the Update button and the Driver Checker will start to install the
SBIG drivers into your system.
7. Once the drivers have finished installing, the Driver Checker will show
the following. At this point you can quit the Driver Checker.
5