User Manual

 Ensure that you are not blocking the device’s internal antenna.
 When you are in areas with weak signals or poor reception, you may lose
reception. You may have connectivity problems due to issues with the service
provider’s base station.
 Move to another area and try again.
 When using the device while moving, wireless network services may be disabled
due to issues with the service provider’s network.
When you turn on your device or while you are using the device, it prompts you to
enter one of the following codes:
 Password: When the device lock feature is enabled, you must enter the
password you set for the device.
 PIN: When using the device for the first time or when the PIN requirement is
enabled, you must enter the PIN supplied with the SIM or USIM card. You can
disable this feature by using the Lock SIM card menu.
 PUK: Your SIM or USIM card is blocked, usually as a result of entering your PIN
incorrectly several times. You must enter the PUK supplied by your service
provider.
 PIN2: When you access a menu requiring the PIN2, you must enter the PIN2
supplied with the SIM or USIM card. For more information, contact your service
provider.
The battery icon is empty
Your battery is low. Charge the battery.
The battery does not charge properly (For Service-approved chargers)
 Ensure that the charger is connected properly.
 Visit a Service Center and have the battery replaced.