User's Manual

-12-
 PUK
The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with
SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card
will be invalid. Please contact the network operator to replace the SIM card.
 Barring code
A barring code is required for setting the call barring function. You can obtain this code from the
network operator to set the call barring function.
3.2 Installing Memory Card
The Memory card is a pluggable mobile storage card inside the mobile phone.
To install the Memory card, place its indented side downward, insert the card into the card slot.
To remove the Memory card, take the card out.
Note:
1. The mobile phone cannot automatically identify the Memory card being inserted when the
mobile phone is powered on. You must power off the mobile phone and then power it on, so that the
phone can identify the Memory card.
2. The Memory card is a miniature object. Keep it out of the reach of children for fearing that
children swallow it!
3.3 Charging the Battery
The lithium battery delivered with the mobile phone can be put into use immediately after being
unpacked.
Battery level indication: