Specifications
Multipoint
11
11
PIPE CONNECTION
5.8 The outlet spout can be removed to ease installation.
5.9 The handwash has been designed for a 15mm water pipe using the pusht
connection - see Fig. 11 on page 12.
5.10 Decide where to connect the cold water mains feed to the handwash. Ensure
that the pipe you have selected is not a gas pipe or a hot water pipe. Chrome and
stainless steel pipe is not recomended.
19.5
74
29
86
196.5
151
235
Cable
Clamp
Inlet water
connection
Terminal
Block
Rear entry access
area for electricity and
inlet water supply
Figure 9 Unit layout - Dimensions (mm)