Technical data

17
Table 5: Spares
Fig. 12: Spares diagram
Fig. 13: Cold water combination valve spares
SPARE PARTS
A full range of spare parts are available for the
PremierPlus range. Refer to the Techincal Data label
on the unit to identify the model installed and ensure
the correct part is ordered.
DESCRIPTION PART NO.
1 Immersion heater (lower) 95 606 946
2 Immersion heater (upper) 95 606 947
3 Immersion heater gasket 95 611 822
4 Immersion heater backnut 95 607 869
5 Immersion heater key 95 607 861
6 Tundish 95 605 838
7 Expansion valve - 6bar 95 605 899
8
Cold water combination
valve complete
95 605 897
9
Cold water combination
body
95 605 900
10
Pressure reducing valve
cartridge 3.5bar
95 605 898
11
Temperature/Pressure Relief
Valve
95 605 810
12
Expansion vessel 12 litre
(100, 120 and 150 litre
models)
95 607 863
13
Expansion vessel 18 litre
(170 and 210 litre models)
95 607 864
14
Expansion vessel 24 litre (250
and 300 litre models)
95 607 612
15 Blanking plate assembly 95 605 881
16 Nut & olive pack (4 of each) 95 607 838
Direct units only
17
Combined thermostat and
thermal cut-out
95 612 599
18 Terminal cover 95 607 836
Indirect units only
19 Indirect thermostat 95 612 697
20 Indirect Thermal cut-out 95 612 698
21 Motorised 2 port valve 95 605 819
22 Terminal housing 95 607 837
23 4 Way terminal block 95 607 902
3
23
20
1
4
17
18
15
18
4
11
19
Cold Mains
Connection (22mm)
Outlet Connection
(22mm)
Outlet Connection
(15mm)
9
10
7