Furniture Assembly Instructions

ManualsBrandsSanus Systems ManualsIndoor FurnishingEFAV-II

Assembly Instructions for Model: EFAV-II

Thank you for choosing the Sanus Systems Model EFAV-II. Every effort has

been made to ensure that your Sanus Systems furniture is perfect. If you have

questions or feel that there is a problem of any kind, please contact us at

800-359-5520 or at www.sanus.com. We can quickly help with any issues

regarding assembly or missing parts. Replacement parts for Sanus systems

products purchased through authorized dealers will be shipped directly to you.

Supplied Parts List: (All threaded fasteners are shown full scale)

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.01.06 (000009)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Allen Key - K

Qty. 1

Floor Glide - I

Qty. 5

Pan head Bolt - G

Qty. 5

Shelf Connector - H

Qty. 5

Angled Center Support - C

Qty. 1

3” Cope Tube - B

Qty. 4

8” Pillar - A

Qty. 5

Video Shelf - E

Qty. 2

Metal Base - D

Qty. 1

Top Bolt - F

Qty. 5

Wire Bushing - J

Qty. 4

Summary of content (5 pages)

PAGE 1
Assembly Instructions for Model: EFAV-II Thank you for choosing the Sanus Systems Model EFAV-II. Every effort has been made to ensure that your Sanus Systems furniture is perfect. If you have questions or feel that there is a problem of any kind, please contact us at 800-359-5520 or at www.sanus.com. We can quickly help with any issues regarding assembly or missing parts. Replacement parts for Sanus systems products purchased through authorized dealers will be shipped directly to you.
PAGE 2
Step 1 - Attach Floor Glides to Metal Frame Thread the five Floor Glides (I) into the Metal Base (D). Diagram 1 I D I I I I Step 2 - Attach 3” Cope Tubes to Metal Base Thread a Shelf Connector (H) securely into the four 3” Cope Tubes (B). NOTE: Do not tighten the Pan Head Bolts (G) until the entire EFAV-II is assembled. Place a Pan Head Bolt (G) through each of the four holes in the Metal Base (D); then, thread them into the four 3” Cope Tubes (B).
PAGE 3
Step 3 - Place a Video Shelf on the Metal Base Align four holes in a Video Shelf (E) with the Shelf Connectors (H) threaded into the 3” Cope Tubes (B) in Step 2; then, place the Video Shelf onto the 3” Cope Tubes. Diagram 3 H B E H B Step 4 - Secure the Angled Center Support to the Video Shelf NOTE: Make sure the coped end of the Angled Center Support (C) fits over the Metal Base (D).
PAGE 4
Step 5 - Attach 8” Pillars By hand, firmly thread an 8” Pillar (A) to the four Shelf Connectors (H) protruding through the Video Shelf (E). Diagram 5 A H H E D NOTE If you are installing addditional shelves, refer to the Assembly Instructions for Model: EFVS-II. Step 6 - Secure Video Shelf to 8” Pillars Place the Video Shelf (E) on the 8” Pillars (A); then, using the Allen Key (K) and five Top Bolts (F), secure the Video Shelf to the 8” Pillars.
PAGE 5
Step 7 - Install Wire Bushings Snap the four Wire Bushings (J) into the four holes in the Video shelves (E). Diagram 7 E J E J Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.01.06 (000009) Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.