Dual-Sided Ceiling Mount Instruction Manual

ManualsBrandsSanus Systems ManualsIndoor FurnishingLC2A

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA • sanus.com

Americas: 800-359-5520 • 651-484-7988 • info@sanus.com

Europe, Middle East, and Africa: 31 (0) 40 26 68 619 • sanus.europe@sanus.com

Asia Paciﬁ c: 86 755 8996 9226 • 800 999 6688 (mainland China only) • sanus.ap@milestone.com

All other brand names or marks are used for identiﬁ cation purposes and are trademarks of their respective owners.

(6901-170129 <00>)

LC2A

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

Thank you for choosing the Sanus Systems VisionMount™ LC2A. The

VisionMount™ LC2A is designed to mount two  at panel televisions weighing

up to 59 kg (130 lb) each to an existing NPT 1-1/2 threaded pipe drop. The

LC2A tilts the televisions from +5° to -15°, swivel up to ±90°, and roll ±6°.

INFORMATIONS IMPORTANTES CONCERNANT LA SÉCURITÉ –

CONSERVEZ CES INSTRUCTIONS

Merci d’avoir choisi le VisionMount™ LC2A de Sanus Systems. Le VisionMount™

LC2A est conçu pour  xer deux téléviseurs à écran plat pesant jusqu’à 59 kg

(130 lb) chacun à une conduite verticale  letée NPT de 1½ po existante. Le

LC2A permet aux téléviseurs une inclinaison de +5° à -15°, un pivotement

horizontal jusqu’à ±90° et latéral de ±6°.

WICHTIGE SICHERHEITSHINWEISE – BEWAHREN SIE DIESE HINWEISE

SORGFÄLTIG AUF

Vielen Dank, dass Sie sich für die VisionMount™ LC2A von Sanus Systems

entschieden haben. Mit der VisionMount™ LC2A können Sie zwei

Flachbildschirmfernseher, mit einem Höchstgewicht von jeweils 59 kg, an eine

vorhandene NPT 1-1/2- Gewindekupplung anbringen. Mit der LC2A können

Sie Fernseher um +5° bis -15° neigen, bis zu ±90° schwenken und um ±6°

querneigen.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD – CONSERVE ESTAS

INSTRUCCIONES

Muchas gracias por elegir el LC2A VisionMount™ de Sanus Systems. El LC2A de

VisionMount™ está diseñado para soportar dos televisores de paneles planos

que pesen hasta 59 Kg. (130 libras) cada uno en un soporte de tubo roscado

NPT 1-1/2 existente. El LC2A hace que los televisores puedan sufrir una

inclinación desde +5º hasta -15º, una rotación de hasta ±90° y un balanceo de

±6°.

INSTRUÇÕES DE SEGURANÇA IMPORTANTES – GUARDE ESTAS

INSTRUÇÕES

Obrigado por escolher o suporte de teto Sanus Systems VisionMount™ LC2A.

O VisionMount™ LC2A é projetado para instalar duas televisões de tela plana

com peso até 59 kg (130 lb) cada, em um tubo de entrada rosqueada de 1-1/2

NPT. O LC2A inclina as televisões de +5° a -15°, gira até ±90° e oscila ±6°.

BELANGRIJKE VEILIGHEIDSINSTRUCTIES – BEWAAR DEZE GOED

Bedankt voor uw keuze voor een Sanus Systems VisionMount™ LC2A . De

VisionMount™ LC2A is ontworpen voor de montage van twee  atpanel

televisies met een gewicht tot 59 kg (130 lb) elk aan een bestaande NPT 1-1/2

hangbuis met schroefdraad. De LC2A kantelt de televisies van +5° tot -15°,

zwenkt tot ±90°, en rolt ±6°.

ISTRUZIONI DI SICUREZZA IMPORTANTI - CONSERVARE CON CURA

QUESTE ISTRUZIONI

Grazie per aver scelto il supporto Sanus Systems VisionMount™ LC2A. Il

supporto VisionMount™ LC2A è progettato per montare due televisori a

schermo piatto, ciascuno con peso  no a 59 kg (130 libbre), su colonne

 lettate NPT 1-1/2. Il supporto LC2A permette un’inclinazione dei televisori da

+5° a -15°, una rotazione  no a ±90° e un rollio di ±6°.

ΣΗΜΑΝΤΙΚΕΣ ΟΔΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ - ΦΥΛΑΞΤΕ ΑΥΤΕΣ ΤΙΣ ΟΔΗΓΙΕΣ

Ευχαριστούμε που επιλέξατε το Sanus Systems VisionMount™ LC2A. Η βάση

VisionMount™ LC2A έχει σχεδιαστεί να στηρίζει δύο τηλεοράσεις επίπεδης

οθόνης έως 59 kg (130 lb), με την κάθε μία σε υπάρχοντα αγωγό σπειρώματος

NPT 1-1/2. Η βάση LC2A επιτρέπει κλίση των τηλεοράσεων από +5 έως -15˚,

περιστροφή ±90° και κύλιση ±6˚.

VIKTIGE SIKKERHETSINSTRUKSJONER – TA VARE PÅ DISSE

INSTRUKSJONENE

Takk for at du valgte et VisionMount™ LC2A-takstativ fra Sanus Systems.

VisionMount™ LC2A er utformet for montering av to  atskjerm ernsyn på

opptil 59 kg hver til en eksisterende NPT 1-1/2 stang med gjenger. Med LC2A

kan  ernsynene vippes fra +5° til –15°, dreies opptil ±90° og rulles ±6°.

VIGTIGE SIKKERHEDSOPLYSNINGER - GEM DISSE OPLYSNINGER

Tak, fordi du har valgt VisionMount™-LC2A fra Sanus Systems. The

VisionMount™-LC2A er udformet til at montere to  adskærme på op til 59 kg

hver på et eksisterende NPT 1-1/2 rør med gevind. Med LC2A kan tv'et vippes

fra +5° til -15°, drejes op til ±90° og rulles ±6°.

VIKTIGA SÄKERHETSANVISNINGAR – SPARA DESSA ANVISNINGAR

Tack för att du valt Sanus Systems VisionMount™ LC2A. VisionMount™ LC2A

är utformad för att montera två platta tv-apparater som väger upp till 59 kg

(130 lb) var och en till en be ntlig NPT 1-1/2-gängat utlopp. LC2A lutar TV-

apparaten från +5° till -15°, vrids upp till ±90°, och lutas ±6°.

ВАЖНЫЕ ИНСТРУКЦИИ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ –

СОХРАНИТЕ ЭТИ ИНСТРУКЦИИ

Благодарим вас за выбор кронштейна Systems VisionMount™ LC2A.

Кронштейн VisionMount™ LC2A предназначен для крепления двух

плоских телевизионных панелей весом до59кг (130фунтов) каждая к

существующему нарезному трубчатому перепадуNPT 1-1/2. Кронштейн

LC2A позволяет регулировать угол наклона телевизоров от +5° до

-15°, поворота вокруг вертикальной оси до ±90° и поворота вокруг

горизонтальной оси ±6°.

Summary of content (24 pages)

PAGE 1
® ® LC2A (6901-170129 <00>) EN IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Thank you for choosing the Sanus Systems VisionMount™ LC2A. The VisionMount™ LC2A is designed to mount two flat panel televisions weighing up to 59 kg (130 lb) each to an existing NPT 1-1/2 threaded pipe drop. The LC2A tilts the televisions from +5° to -15°, swivel up to ±90°, and roll ±6°.
PAGE 2
PL WAŻNE INSTRUKCJE DOTYCZĄCE BEZPIECZEŃSTWA — NIE WYRZUCAĆ Dziękujemy za wybranie uchwytu VisionMount™ LC2A firmy Sanus Systems. Uchwyt VisionMount™ LC2A jest przeznaczony do montażu dwóch telewizorów płasko ekranowych o wadze do 59 kg (130 funtów) każdy do istniejącego połączenia rury gwintowanej NPT 1-1/2. Uchwyt LC2A umożliwia nachylanie w zakresie od +5° do -15°, obrót do ±90° i obracanie w poziomie w zakresie ±6°.
PAGE 3
CAUTION: EN Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper installation may cause property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the installation, contact Sanus Systems Customer Service or call a qualified contractor. Sanus Systems is not responsible for damage or injury caused by incorrect mounting, assembly, or use.
PAGE 4
EL ΠΡΟΣΟΧΗ: Μην χρησιμοποιείτε το προϊόν αυτό για χρήσεις οι οποίες δεν αναφέρονται ρητά από τη Sanus Systems. Τυχόν αντικανονική εγκατάσταση μπορεί να προκαλέσει υλικές ζημιές ή ατομικό τραυματισμό. Εάν δεν αντιλαμβάνεστε αυτές τις οδηγίες ή έχετε αμφιβολίες για την ασφάλεια της εγκατάστασης, επαφή με την Εξυπηρέτηση Πελατών της Sanus Systems ή επικοινωνήστε με εξειδικευμένο εγκαταστάτη.
PAGE 5
DİKKAT: TR Bu ürünü Sanus Sistemleri tarafından açıkça belirtilmeyen bir amaç için kullanmayın. Hatalı kurulum kişisel yaralanmaya ya da cihazınızın zarar görmesine neden olabilir. Bu talimatları anlamadıysanız ya da kurulumun düzgün bir şekilde yapıldığından emin değilseniz Sanus Sistemleri Müşteri Hizmet Merkezi ya da yetkili bir uzman ile iritibata geçin. Sanus Sistemleri, hatalı kurulum, tertibat ya da kullanımdan dolayı meydana gelen hasar veya yaralanmalardan hiçbir şekilde sorumlu değildir.
PAGE 6
EN Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts! FR Pièces et matériel fournis Avant de commencer l’assemblage, assurez-vous que toutes les pièces sont présentes et qu’elles ne sont pas endommagées. Si une pièce est manquante ou endommagée, contactez le service Clientèle de Sanus Systems.
PAGE 7
[01] x 4 [02] x 4 [03] x 8 1/4-20 x 0.25 in. 1/4-20 x 2.0 in.
PAGE 8
1-1 EN Attach Brackets to Monitor - for monitors with a flat back. FR Fixer les pattes au moniteur - pour les moniteurs à arrière plat. DE Konsolen an Monitor befestigen - für Monitore mit flacher Rückwand. ES Fijar los soportes al monitor - para monitores de dorso plano. PT Una os Suportes do Monitor ao Monitor - para monitores com Traseira Plana. NL Bevestig de beugels aan de monitor - voor monitors met een platte achterkant.
PAGE 9
M4 M5 [09] [10] [17] [18] [21] [21] [01] [01] M6 M8 [11] [12] [19] [22] [01] 6901-170129 <00> [20] [22] [01] 9
PAGE 10
1-2 EN Attach Brackets to Monitor - for monitors with a curved back or obstruction. FR Fixer les pattes au moniteur - pour les moniteurs à arrière incurvé ou en cas de gêne. DE Konsolen an Monitor befestigen - für Monitore mit gekrümmter Rückwand oder einem Hindernis. ES Fijar los soportes al monitor - para monitores de dorso curvo o con obstrucción. PT Una os Suportes do Monitor ao Monitor - para monitores com parte traseira curva ou com obstruções.
PAGE 11
M4 M5 [13] [14] [17] [21] [18] [21] [21] [23] [21] [23] [01] [01] M6 M8 [16] [15] [19] [22] [24] [01] 6901-170129 <00> [20] [22] [24] [01] 11
PAGE 12
2 EN Install Vise Assemblies NOTE: Do not overtighten the nut [06]. The vise assembly [03] must rotate freely around the carriage bolt [05]. FR Poser les ensembles étaux NOTE : Ne pas serrer excessivement l’écrou [06]. L’ensemble étau [03] doit tourner librement autour du boulon à tête carrée [05]. DE Schraubstockeinheiten anbringen HINWEIS: Die Mutter [06] nicht zu stark anziehen. Die Schraubstockeinheit [03] muss sich ungehindert um den Wagenbolzen [05] drehen können.
PAGE 13
[03] [05] [06] [03] [05] [06] 6901-170129 <00> 13
PAGE 14
3 [30] [02] 14 6901-170129 <00>
PAGE 15
4 [25] [26] 6901-170129 <00> 15
PAGE 16
4 EN Thread the Coupler [25] and Tube [26] onto an existing threaded pipe drop. Once the Tube [26] is properly aligned, tighten the Set Screws [08] using Allen Wrench [28] and the two Set Screws [B] on the Tube using Allen Wrench [29]. FR Enfilez le coupleur [25] et le tube [26] sur le tuyau fileté existant. Une fois que le tube [26] est correctement aligné, serrez les vis de calage [08] à l’aide de la clé Allen [28] et les deux vis de calage [B] sur le tube à l’aide de la clé Allen [29]).
PAGE 17
[28] [29] [08] [26] [25] [B] [08] [26] 5 2x [07] [04] [26] [26] [04] 6901-170129 <00> 17
PAGE 18
[30] 6 EN To adjust for level, loosen the two Allen Bolts [C] on the back of the Axis Assembly [04]. Adjust the television and retighten the Allen Bolts.Tilt is set by simply tilting the television. To adjust tilt tension, loosen the Tension Knobs [D]. FR Pour régler le niveau, desserrez les deux boulons Allen [C] à l’arrière de l’axe [04]. Ajustez la position de la télévision et resserrez les boulons Allen. Réglez l’inclinaison simplement en inclinant la télévision au degré désiré.
PAGE 19
2x [C] [D] [04] 6901-170129 <00> 19
PAGE 20
EN To adjust swivel tension, tilt the television forward and remove the Safety Bracket [F] for use as a wrench to tighten or loosen the Tension Nut [E]. CAUTION: Never completely remove the Tension Nut [E]. The Safety Bracket [F] must be reinstalled after adjustment. Hex hole in Safety Bracket must seat completely down onto Tension Nut [E]. Failure to heed this Caution may result in property damage and/or personal injury.
PAGE 21
PL W celu regulacji oporu obracania przechyl telewizor do przodu i zdejmij wspornik zabezpieczający [F], aby użyć go jako klucza do dokręcenia lub poluzowania pokrętła regulacyjnego [E]. PRZESTROGA: Nigdy nie odkręcaj zupełnie pokrętła regulacyjnego [E]. Po wykonaniu regulacji należy ponownie zainstalować wspornik zabezpieczający [F]. Sześciokątny otwór we wsporniku zabezpieczającym musi być dokładnie nasunięty na pokrętło regulacyjne [E].
PAGE 22
[E] [F] [E] [F] 22 6901-170129 <00>
PAGE 23
EN Leave some slack in the cables so that during motion there is no tension on the connectors. Secure cables by attaching Wire Ties [27] as desired to the Monitor Brackets [01], Axis Assembly [04] , and the NPT Tube [26]. DA Sørg for, at der er kabelslæk, så kablerne ikke strammes, når skærmen bevæges. Fastgør kablerne ved at bruge kabelbånd [27] på skærmbeslagene [01], akseenheden [04] og NPT-røret [26].
PAGE 24
EN Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.