Owner's manual

Bump-on(self adhesive)
Front edge
When placing the glass top on the unit, pay attention to the following tips:
* Ensure painted side is facing down.
* Back edge of the glass top must be flush with the back panel.
* Glass top's overhang at the left side must match that of the right side.
* Lift the glass when repositioning it, do not drag it as it could damage your glass.
x18
Attac h 18 bump-ons to top surface of the back, sides, fro nt rails, and steel brac ket where shown above.
Back edge of the glass top i s flush with back panel.
Abov e is the top view of the cabinet, indicating where the glass top should rest on the cabinet.
Assistance may be needed for this step.