Owner's manual

Fasten the angle brackets to the back as shown above.

Note - th e angle brackets are essential for t he strength of the stand.

Then raise th e left s ide of the glass up and insert t he remaining of the shelf pins into the left side and back.

Lower the glass onto the shelf pins.

NOTE: We recommend that all contents stored in or on this item of furniture be removed before shifting it. The

manufacturers will not be held liable for damage caused when furniture is shifted without first removing its contents.

If furniture is shifted we recommend that it is lifted not dragged.

Assistance will be needed for this step.

Insert 2 shelf pins into the bottom holes in the right side. Place a piece of polystyrene (from the pack) onto

the base as s hown above ( Alternatively you could use a soft rag). Tilt the glass to one side and rest it on top

of the po lysty rene.Then caref ully push th e glass inside the cabinet and r est the right side on the s helf pins.