TV Mount User's Manual

ManualsBrandsSanus Systems ManualsTV MountSanus Flat Panel AV Foundations FFMF2A

Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA • (6901-100126 <07>)

USA Customer Service 1-800-359-5520 • www.sanus.com

FFMF2A

001507.eps

Do not use this product for any purpose not explicitly specied by Sanus Systems.

Improper installation or use may cause personal injury and/or property damage. If

you do not understand these instructions, or if you have doubts about the safety of

the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable

for injury or damage caused by incorrect installation or use.

CAUTION

This product contains small items that could be a choking hazard if swallowed.

Keep these items away from young children!

WARNING

Thank you for choosing the Sanus Systems FFMF2A flat panel

foundation mount. The Sanus Systems FFMF2A flat panel foundation

mount is designed to support a flat panel monitor weighing up to

31 kg (70 lbs). The lower shelves each support additional equipment

weighing up to 11 kg (25 lbs). Hardware for multiple mounting

configurations is included.

OPT

Hardware and procedures for multiple mounting congurations are

included. When you see this symbol, choose the correct conguration to

suit your needs. Not all hardware included will be used.

Summary of content (7 pages)

PAGE 1
FFMF2A Thank you for choosing the Sanus Systems FFMF2A flat panel foundation mount. The Sanus Systems FFMF2A flat panel foundation mount is designed to support a flat panel monitor weighing up to 31 kg (70 lbs). The lower shelves each support additional equipment weighing up to 11 kg (25 lbs). Hardware for multiple mounting configurations is included. WARNING This product contains small items that could be a choking hazard if swallowed.
PAGE 2
Supplied Parts and Hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems Customer Service. Never use damaged parts! [02] x 1 [03] x 1 [04] x 1 [08] x 1 001510.eps FPS20 - Pivot Pin and Gasket [05] x 1 [06] x 1 001508.eps FPS20 - Pillar, Base, and Shelves [07] x 2 001509.eps FPS20 - Brackets [10] x 1 001482.
PAGE 3
1: Install Pillar on Base [01] [02] [38] 001511.eps 2: Install Brackets on Pillar 001511.eps [12] [18] [14] [16] 6901-100126 <07> 001512.eps FPS20 - Install Shelf Brackets 001512.
PAGE 4
3: Choose Correct Mounting Plate 75mm x 75mm or 100mm x 100mm [11] [11] 75mm 100mm 75mm 100mm 00 A 142 r r ow 0.ep s s 001482.eps 200mm x 200mm FPS10 - Star [41] 00 FP s NOTE For monitors with 200mm x 200mm hole spacing, you must remove the existing plate from the head assembly [11] and replace it with the larger plate [10]. p 0.e 2 14 s 00 rrow A [11] 001517.eps [10] 001517.eps 200mm 200mm 6901-100126 <07> 001490.
PAGE 5
4: Install Head Assembly on Monitor For Monitors with Flat Back [30], [31] [19], [20], [21] [23], [24], [25] [11] 00150 001503.
PAGE 6
5: Install Pivot Pin [15] [05] [39] [29] [13] [01] 6: Install Monitor on Pillar [13] [40] [17] [35] [34] [35] 001513.
PAGE 7
: Install Shelves [41] [37] [36] [03], [04] [07] 8: Install Wire Channel Covers 001515.eps [06] [08]001515.eps [09] [09] CSAV, Inc. and its affiliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product.