TV Mount User's Manual
Step 2: Mounting the Monitor Brackets to Televisions with a curved back or other obstruction.
Determine the diameter of the Bolt (T,U,V,W) your TV requires, by hand threading them into the threaded insert on the back of the
TV. If you encounter any resistance stop immediately. Once you have determined the correct diameter, refer to the appropriate
Diagram below. Thread the Bolt through the appropriate Lock Washer (X,Y,Z,AA), a Washer (DD,EE), the Monitor Bracket (E),
a second Washer (DD - M4/M5 diameter only), a Spacer (BB,CC), and î‚¿nally into the TV. Make sure the Monitor Brackets are
vertically centered and level with each other. Repeat the process until each Monitor Bracket is secured to the TV with two bolts.
CC
E
V
Z
EE
W
AA
EE
E
CC
BB
T
X
DD
E
DD
BB
DD
E
DD
Y
U
M4 Diameter Bolt
M8 Diameter Bolt
M5 Diameter Bolt
M6 Diameter Bolt
Diagram 2