WSS1 / WSS2 SPEAKER STAND INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this product is perfect for you! 1 Do you own a Sonos® PLAY:1™ or PLAY:3™ speaker? The speaker stands are designed to support only PLAY:1 and PLAY:3 speakers. Weight Limit: 5.8 lb (2.6 kg) 2 Do you have the tool that is needed? 3 Ready to begin? Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
Dimensions 1313in. (322 322mm) 34 34 in. (866 866 mm) 1010in.
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. NOTE: Quantities shown are for one speaker stand.
Parts and Hardware for STEP 5 Bracket Screw Hardware for STEP 6 ® Sonos PLAY:1™ Bracket 1/4-20 x 5/8 in. Sonos® PLAY:3™ Horizontal Bracket 13 x1 2.7 in. Felt Pad 10 x1 Speaker Screw Sonos® PLAY:3™ Vertical Bracket 1/4-20 x 3/8 in.
STEP 1 Install Base onto Tube 02 04 01 1/4-20 x 3/4 in.
STEP 2 Slide Collars onto Tube 05 06 7
STEP 3 Route Speaker Power Cord NOTE: Ethernet cord, if required (see speaker manual), should always be installed after the appropriate power cord.
STEP 4 Install Rubber Isolation Pads or Carpet Spikes Rubber Isolation Pads Optional Carpet Spikes Twist rubber isolation pads 07 into the base 02 . WARNING: The ends of the carpet spikes 08 are sharp and may scratch flooring, damage wiring, or be hazardous to small children.
OPT Install Ethernet Cord 1 If ethernet cord is required: 1. Set assembled stand upright and feed one end of ethernet cord into the top opening. 2. Work the cord through the tube and pull the end through the bottom opening. NOTE: Ethernet cord should always be installed after the appropriate power cord.
STEP 5 Attach Speaker Bracket 10 14 1/4-20 x 5/8 in.
STEP 6 Attach Speaker - PLAY:1 1/4-20 x 3/8 in.
STEP 6 Attach Speaker - PLAY:3 Horizontal 1/4-20 x 3/8 in. 15 Vertical 1/4-20 x 3/8 in.
STEP 7 Pull Wires 14 STEP 8 Position Collars
o D ne! l l A 15
ESPAÑOL INSTRUCCIONES IMPORTANTES DE SEGURIDAD: GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este producto sea el ideal para sus necesidades. 1 ¿Posee unos altavoces Sonos® PLAY:1™ o PLAY:3™? Los soportes para altavoces fueron concebidos para sostener altavoces PLAY:1 y PLAY:3, exclusivamente.
ESPAÑOL Dimensiones (consulte la página 3) Piezas y elementos de sujeción (consulte la página 4) ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.
Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.
