Instruction Manual
Table Of Contents
- Instruction Manual
- IMPORTANT SAFETY INSTRUCTIONS
- Unpacking
- Parts and Hardware
- Load Your Components
- Using Backstops and Component Straps
- Access Panels for Cable Management
- Install Fan for Additional Ventilation (Top or Bottom)
- Adjust Shelves and Blanking Panels
- Adjust Rack Rails
- Switch Back Panels
- Reverse the Front Door
- Add Keyed Lock to Door (Sold Separately)
- Manage Cables
- Ganging Racks (Ganging Kit Sold Separately)
- Level Feet
- Product Info
5
Load Your Components
CAUTION: Failure to follow loading requirements could lead to instability causing personal injury and/or property damage:
To prevent instability:
• Always load the rack from the bottom up and load the heaviest item first.
• 50% of the total weight should be mounted in the lower 1/3 of the rack.
• Follow these additional requirements when loading rack on its back and then lifting rack to an upright position:
1. Leveling feet, if installed, need to be adjusted all the way in.
2. You must not load more than 20% of the total rated load prior to lifting rack to upright position.
3. All equipment should be securely fastened to the rack.
4. Use caution when lifting rack to upright position as casters may roll. Assistance is required.
1
4
2 / 3
OPT