Installation Guide

13
3 4
CAUTION: Improper use could reduce the holding power
of screws
07
. DO NOT over-tighten the screws.
Go to STEP 3 on PAGE 16.
0711
05
06
IMPORTANT: Holes must be drilled to a depth
of 2 ½ in. (63 mm) — in the center of the stud.
Drill 1/8 in. (3.2 mm) pilot holes.
Install wall plate
05
with screws
07
and washers
06
.
2 ½ in. (63 mm)
1/8 in.
(3.2 mm)