Installation Guide

15
SOLID CONCRETE / CONCRETE BLOCK INSTALLATION [TVs up to 80 lbs. (36.2 kg)]
IMPORTANT: Holes must be
drilled to a depth of 2¾ in. (70 mm).
Never drill into the mortar between blocks.
CAUTION: Be sure the anchors
C1
are seated flush with the
concrete surface.
CAUTION: Improper use could
reduce the holding power of screws
07
.
DO NOT over-tighten the screws.
002862.eps
5/16 in.
(8 mm)
2¾ in. (70 mm)
11 07
2 3 4
06
Drill 5/16 in. (8 mm) pilot holes.
Install wall plate
05
with screws
07
and washers
06
.
Insert anchors
C1
(Fischer UX8 x 50R –
included in the Concrete Installation Kit)
C1
05