SA405 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call: 1-800-359-5520 We’re ready to help!
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS Before You Begin Please verify the following items: Your TV, soundbar, soundbar mount, and any accessories you plan to install DO NOT EXCEED the specified weight limit of your TV wall mount. Figure 1 You read and understand these directions. You refer to the documentation that came with your sound bar, your TV and your TV wall mount for additional guidance. You have the tools needed for installation.
WARNING: • This soundbar mount is only designed for use with TV wall mounts that meet third party safety certifications. • This soundbar mount is ONLY designed to mount BELOW the television (see Figure 3). • This soundbar mount is designed to be installed and utilized only as specified in this manual. The manufacturer is not responsible for improper assembly, use, or handling of this product. • Your wall must be capable of supporting five times the weight of your TV, TV mount, and soundbar combined.
Weight Restrictions DO NOT EXCEED 15 lbs. (6.8 kg) for this Soundbar Mount Weight Limit for SA405 15 lbs. (6.8 kg) Weight Limit for Your TV Mount CAUTION: Avoid potential personal injuries and property damage! The weight of your TV, PLUS this soundbar mount, your soundbar, and any accessories, MUST BE LOWER than the maximum weight rating of your TV mount. See your TV mount's manual for maximum weight allowed. 2 lbs. (0.9 kg) Soundbar Mount 4 (plus) __ kg (__ lbs.
Items Needed Phillips Screwdriver Level Included in this Kit 3/16 in. Hex Key H 3rd Party Certified TV Wall Mount * *Your TV wall mount may vary from the illustrations throughout this manual — note that the procedure to install the soundbar is the same.
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1 & STEP 3 Mount Spacer Washer 05 x 2 Washer M4/M5 M6/M8 06 x 4 07 x 8 Large Washer Large Washer M4/M5 M6/M8 08 x 4 09 x 4 7
Parts and Hardware for STEP 1 & STEP 3 (continued) M4 x 16mm M5 x 16mm 10 x 4 11 x 4 M6 x 16mm 8 12 x6 M6 x 25mm 13 x4 M8 x 20mm 14 x 4
M4 x 40mm 15 x 4 M6 x 40mm 17 x 4 M5 x 40mm 16 x 4 M6 x 50mm 18 x 4 TV Spacers M8 x 40mm 19 x 4 22mm 20 x 4 9
STEP 1 Secure the Brackets onto Your Sound Bar Look at the mounting holes on the back of your soundbar to determine your install method A, B or C.
OPTION A: Rivets with a Manufacturer’s Supplied Hanger Bracket Attach the soundbar brackets 01 to your soundbar’s hanger bracket with knobs 04 and keyhole screws 03 .
OPTION B: Key Hole Slots Assemble knobs 04 and keyhole screws 03 . Attach the soundbar brackets 01 to your soundbar using the knob assemblies. 04 03 IMPORTANT: If needed, use fender washers 02 under soundbar bracket 01 to rest flat onto the soundbar surface.
01 01 Bottom of Soundbar 13
OPTION C: Threaded Inserts Attach the soundbar brackets 01 to your soundbar using two screws 10 , 11 or 12 and washers 06 or 07 . IMPORTANT: If needed, use fender washers 02 under soundbar bracket 01 to rest flat onto the soundbar surface.
01 M4 M5 M6 10 11 12 screws 07 washers 06 Bottom of Soundbar 15
STEP 2 Prepare Your TV (if mounted) If your TV is already mounted: CAUTION: Follow your TV mount’s manual for instructions on how to safely remove your TV and TV bracket. 1. Remove any cables attached to your TV. 2. Remove your TV/bracket assembly from your wall plate, arm assembly, or pillar. HEAVY! You may need assistance with this step! 3. Remove the TV bracket(s) and hardware from your TV.
2 3 17
STEP 3 Install Soundbar Bracket with Your TV Mount Determine which screw diameter fits your monitor or TV — M4, M5, M6, or M8. • For TVs with a flat/ unobstructed back, follow Step 3.1. * • For TVs with a rounded/ irregular/obstructed back, follow Step 3.2. * If you need extra space to accommodate cables, recesses, or protrusions, follow Step 3.2. 18 Step 3.1 Step 3.
Standard configurations shown. For special applications, contact Customer Service. IMPORTANT: To offset the shift in height of your TV bracket, due to the soundbar brackets 01 , you MUST use washers 05 , in the top hole locations. Step 3.1 CAUTION: Verify adequate thread engagement with your screw/washer/spacer combination AND all brackets. — Too short will not hold the TV. — Too long will damage the TV. Step 3.
M4 STEP 3.1 M5 10 11 Install your TV mount’s interface bracket with soundbar brackets 01 and washers 05 . NOTE: Sound bar brackets 01 AND washers 05 install BETWEEN your TV and TV brackets. M6 M6 M8 12 13 14 06 08* 07 09* 05 NOTE: Extra screws and washers are provided, if needed for better fit (TV screws are too short - or too long). WARNING: You must use * or the larger washers 08 01 09 (unless they do not fit yourTV bracket). WARNING: Soundbar MUST NOT be mounted on TOP of your TV.
M4 STEP 3.2 M5 15 16 08 09 M8 17 18 19 screws washers 05 NOTE: Sound bar brackets 01 AND washers 05 install BETWEEN your TV and TV brackets. WARNING: You must use * or the larger washers M6 06 08* 07 09* Install your TV mount’s interface bracket with soundbar brackets 01 , washers 05 and spacers 20 . NOTE: Extra screws and washers are provided, if needed for better fit (TV screws are too short - or too long). M6 20 01 (unless they do not fit yourTV bracket).
STEP 4 Adjust Soundbar Bracket Adjust both arms of soundbar brackets 01 until your soundbar or soundbar hanger is in your desired position. NOTE: You may need to reposition the hole locations in soundbar brackets 01 to adjust your soundbar to the desired position. IMPORTANT: The final position of your soundbar must be within 2 in. (51 mm) of the TV. NOTE: When positioning your soundbar, make sure you will be able to access the control buttons.
OPTION A OPTIONS B & C 01 ≤ 2 in. (51 mm) 01 ≤ 2 in.
STEP 4 (continued) CAUTION: The MIDDLE connection of soundbar brackets 01 must not extend beyond the edge of the TV.
NOTE: The soundbar brackets 01 should be positioned as vertically as possible.
STEP 5 Tighten Connections H H Once your soundbar or soundbar hanger is in the desired position, tighten ALL screw and knob connections. IMPORTANT! Do not over-tighten the screws — this will deform the washers.
STEP 6 Hang Your TV/Soundbar Assembly Follow your TV wall mount installation manual to hang your TV assembly.
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES LEA EL MANUAL COMPLETO ANTES DE UTILIZAR ESTE PRODUCTO – CONSERVE ESTAS INSTRUCCIONES Antes de comenzar Verifique los siguientes puntos: Que su televisor, la barra de sonido, la montura de barra de sonido y cualquier accesorio que vaya a instalar NO EXCEDAN el límite de peso especificado del soporte del televisor. Que va a leer y que comprende estas indicaciones. Que tiene las herramientas necesarias para la instalación.
ADVERTENCIA: ESPAÑOL • Esta montura de barra de sonido ha sido diseñada exclusivamente para su uso con soportes de pared para televisores que cumplan las certificaciones externas de seguridad. • Esta montura de barra de sonido ha sido diseñada EXCLUSIVAMENTE para colocarse DEBAJO del televisor (consulte la Figura 3). • Esta montura de barra de sonido está diseñado para instalarse y utilizarse exclusivamente • • como se especifica en este manual.
ESPAÑOL Restricciones de peso PÁGINA 4 NO EXCEDA los 6,8 kg (15 lb) en la montura de barra de sonido Límite de peso de SA405 6,8 kg (15 lb) Límite de peso de su soporte para televisor PRECAUCIÓN: Evite posibles lesiones personales y daños materiales. El peso del televisor, MÁS la montura de la barra de sonido, la barra de sonido y los accesorios DEBE SER MENOR que el peso máximo permitido para el soporte del televisor. Consulte el peso máximo permitido en el manual de su soporte para televisor.
Piezas necesarias Este kit incluye PÁGINA 5 ESPAÑOL *El soporte de pared para su televisor puede variar de las ilustraciones que aparecen en este manual. Tenga en cuenta que el procedimiento de instalación de la barra de sonido no varía. Piezas y elementos de sujeción suministrados PÁGINA 6 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones.
ESPAÑOL PASO 1 Instale el soporte de la barra de sonido PÁGINA 10 Observe los orificios de montaje situados en la parte trasera de su barra de sonido para determinar su método de instalación A, B o C. A: Remaches con soporte para colgar independiente. B: Ranuras de cerradura. C: Orificios roscados.
ESPAÑOL OPCIÓN C: Orificios roscados PÁGINA 14 Acople los soportes 01 a la barra de sonido utilizando los dos tornillos 10 , 11 arandelas 06 o 07 . o 12 y IMPORTANTE: Si lo necesita, use arandelas de protección 02 bajo el soporte de la barra de sonido 01 para mantener plana la superficie.
ESPAÑOL PASO 3 PÁGINA 18 Instale el soporte de la barra de sonido con el de su televisor Determine el diámetro de los tornillos para su monitor y su tipo de televisor: M4, M5, M6, o M8. • Para televisores con dorso plano/libre de obstrucciones, siga el Paso 3-1. * • Para televisores con dorso redondeado/irregular/con obstrucciones, siga el Paso 3-2. *Si necesita más espacio para cables, concavidades o protuberancias, siga el Paso 3-2. Se muestra la configuración estándar.
PASO 3-1 PÁGINA 20 ESPAÑOL Monte el soporte de acoplamiento de su montura para televisor con los soportes de la barra de sonido 01 y arandelas 05 . NOTA: Los soportes y las arandelas barra de sonido instalan entre el televisor y televisión corchetes. NOTA: Se proporcionan tornillos y arandelas adicionales, si es necesario para un mejor ajuste (Tornillos de televisión son demasiado cortos- o demasiado largo).
ESPAÑOL PASO 4 Ajuste el soporte de la barra de sonido PÁGINA 22 Ajuste los dos brazos de los soportes de la barra de sonido 01 hasta que esta o su soporte se encuentren en la posición deseada. NOTA: Posiblemente necesite reubicar los orificios de los soportes de la barra de sonido 01 para ajustarla a la posición deseada. IMPORTANTE: La posición final de la barra de sonido debe encontrarse a 51 mm (2 pulg.) del televisor como máximo.
ESPAÑOL PASO 5 Ajuste las conexiones PÁGINA 26 Cuando la barra de sonido o su soporte se encuentre en la posición deseada, ajuste TODAS las conexiones de tornillos y perillas. ¡IMPORTANTE! No ajuste en exceso los tornillos ya que podría deformar las arandelas. PÁGINA 27 PASO 6 Colgar el conjunto de barra de sonido/televisor Siga las instrucciones del manual de instalación del soporte de pared para televisor para colgar el módulo.
Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Find us on Facebook: SANUS Leave a review: sanus.com Follow us on Twitter @sanussystems ©2016 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.