S A N U S SVST EIVIS THE UNION OF FORM AND FUNCTION lrtternational Instruction Manual For Steel Foundations® SF22 and SF26 Weight Capacity SF30 and SF34 Weight Capacity Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA Customer Service: (800) 359-5520 • (651) 484-7988 • info@sanus.com Customer Service Europe:+ 31 40 2324700 • europe.sanus@milestone.com (6901-300165.
j i I i l' 1· ' 1 : G::> nn Important: This product uses two different feet for each base. Before installing, be sure to checkthatthe feet are mounted with the (1) foot on the front left and rear right of the base, (2) front right and rear left. The designation (1) & (2) are on the bottom of each foot.
'Take the time to find the right speaker locations for your listening room.' 1] Attach the plastic feet (e) to the comers of the base with the small pan head bolts (f). Photo 2-Group two pillars with each base. Align the holes in the base with the holes in the isolation block (a). Bolt the pillars and the base together with the isolation block between them using the large pan head bolts (b) and lock washers (c). Photo 3-Using the wire guide is optional.
protrudes slightly through the bottom. Place the speaker on the steel speaker studs. Photo 5-Next, insert the small allen key (i) into the bottom of each steel speaker stud and adjust them until the speaker is level. Lock the studs in place with a machine nut (h). Use of the steel speaker studs is optional.* The rubber isolation pads are provided as an alternative and may be threaded into the comers of the top plates.
