S~~LJ!S THE UNION OF S"YSTEIV1S FORM AND FUNCTION STEEL FOUNDATIONS® SFC INSTRUCTION MANUAL Page 1
•' :: I ;: cb : nn Important: This product uses two different feet for each base. Before installing, be sure to check thatthe feet are mounted with the (1) foot on the front left and rear right of the base, (2) front right and rear left. The designation (1) & (2) are on the bottom of each foot.
'Take the time to find the right speaker locations for your listening room. ' 1] Attach the plastic feet (e) to the corners of the base with the small pan head bolts (f). Photo 2-Group two pillars with the base. Align the holes in the base with the holes in the isolation block (a). Bolt the pillars and the base together with the isolation block between them using the large pan head bolts (b) and lock washers (c). Photo 3-Using the wire guide is optional.
] The Steel Foundations center channel stand has included a pair of adjustable studs (j) and 114" rubber stud covers (k). These are for use if you require your speaker to angle upwards. Thread the adjustable stud through the top plate with the allen wrench to the desired height. Using a machine nut, lock the threaded stud into place. Photo 5 - Thread the rubber stud covers over the top of the adjustable stud to protect your speaker from being scratched.
