WSWM SONOS® SPEAKER MOUNT INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call.
CAUTION: IMPORTANT SAFETY INSTRUCTIONS — PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS Before getting started, let’s make sure this product is perfect for you! 1 Do you own a Sonos® PLAY:1™ or PLAY:3™ speaker? This speaker mount is designed to support PLAY:1 and PLAY:3 speakers. Weight Limit: 10 lb (4.5 kg) 3 Level Screw driver Electric Drill Stud Finder Awl 1/4 in. (6.4 mm) Masonry Drill Bit Hammer Wallboard Install Pencil 1/8 in.
Dimensions 3-D SPEAKER INTERFACE PLAY:3 BRACKET (INCLUDED) 0.45 in. [11.5mm] 2xø0.26 in. [6.6mm] 2.21 in. [53.3mm] 3.83 in. [97.3mm] 1.99 in. [50.6mm] WALL PLATE TOP VIEW - SONOS PLAY:1 ø0.20 in. [5.1mm] THRU SIDE VIEW - SONOS PLAY:1 ø3.00 in. [76.3mm] 9.05º 66º 27º TRUE ø0.20 in. [5.1mm] SIDE VIEW - NO SPEAKER 132º TOP VIEW - SONOS PLAY:3 SIDE VIEW - SONOS PLAY:3 2.78 in. [70.5mm] 8.81 in. [223.9mm] 9.05º 3.98 in. [101.
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. STEP 1 Parts and Hardware STEP 2 Parts and Hardware Wall Plate Mount Wall Plate Screw #10 x 1¾ in.
STEP 2 Parts and Hardware (cont.) STEP 3 Parts Play:3 Interface Play:3 Interface Screw 10-24 x 1/2 in. 06 x1 Cap Play:1 / Play:3 Screw 08 x1 1/4-20 x 1/2 in.
STEP 1A Attach Wall Plate to Wall Wallboard Option CAUTION: Avoid potential personal injury or property damage! ƕ Drywall covering the wall, must not be less than 1/4 in. (6.4 mm) 1. Make sure that the placement of the wall plate 01 is not on a stud. Position the wall plate 01 at your desired height and level the wall plate 01 and mark the hole locations. 2. Drill pilot holes using a 1/4 in. (6.4 mm) diameter drill bit. 3.
4. Install the wall plate 01 with the two wall plate screws. 02 . CAUTION: Avoid potential personal injury or property damage! Both screws 02 MUST BE firmly tightened to prevent unwanted movement of the wall plate 01 . Ensure the wall plate is securely fastened to the wall before continuing on to the next step. 4 01 01 02 02 NOTE: If needed, you can make small level adjustments to the wall plate 01 by loosening the bottom screw 02 and shifting the wall plate 01 until level.
STEP 1B Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injury or property damage! ƕ ƕ ƕ Drywall covering the wall, must not exceed 5/8 in. (16 mm) Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm) Stud center must be verified 1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder. 2.
4. Install wall plate 01 using two screws 02 . Tighten the screws 02 only until they are pulled firmly against the wall plate 01 . CAUTION: Avoid potential personal injury or property damage! Both screws 02 MUST BE firmly tightened to prevent unwanted movement of the wall plate 01 . Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
STEP 1C Attach Wall Plate to Wall Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injury or property damage! ƕ ƕ ƕ Mount the wall plate 01 directly onto the concrete surface Minimum solid concrete thickness: 8 in. (203 mm) Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm) 1. Position the wall plate 01 on the wall at your desired height. Level the wall plate 01 and mark the hole locations. 2. Drill two pilot holes using a 1/4 in. (6.
4. Install wall plate 01 using two screws 02 . Tighten the screws 02 only until they are pulled firmly against the wall plate 01 . CAUTION: Avoid potential personal injury or property damage! Both screws 02 MUST BE firmly tightened to prevent unwanted movement of the wall plate 01 . Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
STEP 2A Attach Wall Mount to Speaker SONOS® PLAY:1 1 Attach the mount 04 to the Play:1 speaker with the Play:1 / Play:3 screw 07 . NOTE: Speaker may be installed in either the right-side-up position (shown) or up-side-down position, depending on need. NOTE: Either mounting hole on the arm can be used.
STEP 2B Attach Wall Mount to Speaker SONOS® PLAY:3 Vertical Option 1 04 2 05 05 04 06 3 07 1. Attach the Play:3 Interface bracket 05 to the mount 04 with the Play:3 Interface screw 06 . 2. Fit the assembly onto the Play:3 speaker by inserting the legs of the Play:3 Interface bracket 05 into the 4th holes from the end and resting the bracket 05 against the speaker. 3. Secure the assembly to the Play:3 speaker with the Play:1/Play:3 speaker screw 07 .
STEP 2C Attach Wall Mount to Speaker SONOS® PLAY:3 Horizontal Option 1 2 05 04 05 05 06 3 07 14 04 1. Attach the Play:3 Interface bracket 05 to the mount 04 with the Play:3 Interface screw 06 . 2. Fit the assembly onto the Play:3 speaker by inserting the legs of the Play:3 Interface bracket 05 into the 4th holes from the end and resting the bracket 05 against the speaker. 3. Secure the assembly to the Play:3 speaker with the Play:1/Play:3 speaker screw 07 .
STEP 3 Mount Assembly to Wall Plate 04 08 Slide the speaker/wall mount assembly onto the wall plate 01 . Slide the cap 08 onto the mount 04 to finish the assembly.
Adjustments 9.05° Play:1 66º 66° 132º 132° Play:3 The speakers can be rotated as desired on the mount. Play:3 30° The speakers can be tilted on the mount.
THIS PAGE INTENTIONALLY LEFT BLANK 17
ESPAÑOL INSTRUCCIONES IMPORTANTES DE SEGURIDAD: GUARDE ESTAS INSTRUCCIONES Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de empezar, asegúrese de que este es el producto adecuado para usted. 1 Este soporte para altavoces está diseñado para sostener los altavoces Sonos® PLAY:1 y PLAY:3, así como la mayoría de altavoces pequeños que admiten soporte. Peso máximo: 4,5 kg (10 lb) 3 Nivel Destornillador Taladro eléctrico Localizador de montantes Punzón 6,4 mm (1/4 pulg.
ESPAÑOL Dimensiones página 3 Piezas y elementos de sujeción suministrados página 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, en caso de ser tragadas, podrían causar asfixia. Antes de comenzar a montar la unidad, verifique que dispone de todas las piezas y que se encuentran en buen estado. Si no dispone de todas las piezas o alguna está dañada, no devuelva el elemento defectuoso al distribuidor. Póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas en mal estado.
ESPAÑOL 1. 2. 3. 4. Localice el montante. Verifique y marque el centro del montante buscando sus bordes con un punzón, un clavo fino o un localizador de montantes de borde a borde. Coloque la placa mural 01 a la altura deseada y alinee los orificios con la línea central del montante. Nivele la placa mural 01 y marque la posición de los orificios. Taladre tres orificios guía con una broca de 3 mm (1/8 pulg.) de diámetro. IMPORTANTE: Los orificios guía deben taladrarse a una profundidad de 45 mm (1 ¾ pulg.).
ESPAÑOL PASO 2A Fijar el soporte de pared al altavoz - Sonos® Play:1 página 12 Fije el soporte 04 al altavoz Play:1 con el tornillo del altavoz Play:1 / Play:3 07 . NOTA: Puede instalar el altavoz con la parte derecha hacia arriba (como se muestra) o boca abajo, en función de sus necesidades. NOTA: Se puede utilizar cualquier orificio de montaje en el brazo. PASO 2B Fijar el soporte de pared al altavoz - Sonos® Play:3 Opción vertical 1. 2. 3.
THIS PAGE INTENTIONALLY LEFT BLANK 22
THIS PAGE INTENTIONALLY LEFT BLANK 23
Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com UK: 0800 056 2853 Leave a review: sanus.com Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.
