COMMERCIAL SYSTEMS S1000FX-GX UV Filter System 1-888-726-8869 www.sanuvox.com SANUVOX TECHNOLOGIES INC. COPYRIGHT 2010 v.1.
COMMERCIAL SYSTEMS WARNING B A Before installing or performing maintenance or service on the purifier, DISCONNECT from main power. Electrical shock can cause injury or death. C WARNING D Never expose eyes or skin to ultraviolet light from any source. The Purifier MUST be DISCONNECTED from power source before performing maintenance or service. Personal injury may result. E WARNING J Do not touch Lamp glass without gloves. Reduced performance of Lamp may result. Clean Lamp after handling.
COMMERCIAL SYSTEMS STEP #1 Install Inlet / Outlet Collars (each collar are a pair of 2 x 8” round inlets and outlets) - Open the three (3) access doors and insert the two pairs of collars into the S1000FX-GX. Align the holes and screw down each pair of collars from the top of the S1000FX-GX with the included philips screws (6 screws per collar) Make special notice of the orientation of the notch on the right side collar.
COMMERCIAL SYSTEMS STEP #3 Insert Filters - Insert the two (2) pre-filters and the main filter. Follow the arrow for airflow for proper filter direction. After the main filter is installed. Close the latch to secure the filter in place Close the first door (blower compartment) and close the other two doors. STEP #4 Operation - The S1000FX-GX is now ready to be plugged into a 110V receptacle. The S1000FX-GX may be used in many diverse applications and orientations.