EXZES ZZ Radio System Manual

103
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Changing the Code Function Names:
1) Fromwithin the RACINGmenu,scrollUP or DOWNtohighlighteither the
CODEAX1 or the CODEAX2 menu depending on which Code Auxiliary
functions you want to program. In this section, we show naming and
programming Code Auxiliary 1.
2) Press theENTERkey toopenthe CODEAX1menu.CODE01 >0will be
highlighted.
3) ScrollUPorDOWNtohighlighttheCodefunctionyouwanttorename.
This section covers both the Code Auxiliary 1 and Code Auxiliary 2 menus, since programming each of them is exactly the
same. Choose either the CODEAX1 or the CODEAX2 menu depending on which of the two Code Auxiliary functions you
want to program.
CODEAX1 AND CODEAX2 MENU
{
CODE AUXILIARY 1 AND CODE AUXILIARY 2
}
RACING
4) Using the same methods
that you used to change the
Model Name, change the
Code Name as desired. For
example, DRFEEL. For more
information, see the Model
Name section on pages 23
and 24.
Changing the Code Auxiliary Values:
1) FromwithintheCODEAX1menu,scrollUPorDOWNtohighlightthedesired
Code Auxiliary value you would like to change.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredCode
Auxiliaryvalue.RefertheUser'sGuideoftheSSL-compatibleproductyou're
controlling to know what Code Auxiliary values to use.
CODE01 through CODE10 setting range is -100 to 100. The default setting for all Code Auxiliary functions is 0.
3) Press the ENTER key, then repeat steps 1 and 2 to change any other desired Code Auxiliary values.
Depending on the Auxiliary 1 or Auxiliary 2 Operating Mode chosen, you can program either 5 CODE functions per Auxiliary
channelorupto10CODEfunctionsperAuxiliarychannel.Formoreinformation,seetheAUXTYPEMenusection
on page 44.
ToaccesstheCUSTOMmenu,turnthetransmitterON,presstheSELECTswitch
tohighlighttheCUSTOMmenu,presstheENTERkeytoopentheCUSTOMmenu.
TheCUSTOMmenufeaturestheCH-SETmenuandanyotherfavoriteProgramming
Menusyouaddtoit.ScrollUPorDOWNtohighlightthedesiredProgramming
Menu, then press the ENTER key to open that menu.
CUSTOM MENU OVERVIEW CUSTOM
BASICModemustbeturnedOFFtoaccesstheSETUPmenu.Formoreinformation,seetheTurningBASICModeONand
OFF section on page 20. In addition, depending on the Car Type chosen, some Function Programming Value Names may
differ from those shown in this section.
RACING