EXZES ZZ Radio System Manual

104
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
The CH-SET menu allows you to make a number of common function Programming Value changes to all four channels without
the need to enter each of those function's Programming Menus separately. For example, you can make all of your desired
Programming Value choices for functions such as End Point Adjustment, Exponential, Curves, Servo Speed, Fail Safe settings and
more for each channel, all from within the same menu.
If Racing Mode is turned ON and if you've chosen to program one or more Racing Mode functions separately, a Racing Mode
Icon will be displayed next to the function Programming Value to indicate which Racing Mode you're currently programming the
function for. For more information, see the R-MODE Menu section on pages 81 and 82.
This section details how to use the CH-SET menu. For information about programming each of the Programming Menus
within the CH-SET menu, refer to the specific Programming Menu sections detailed previously.
CH-SET MENU
{
CHANNEL SET MENU
}
CUSTOM
Choosing the Channel:
1) FromwithintheCUSTOMmenu,scrollUPorDOWNtohighlighttheCH-SET
menu.
2) PresstheENTERkeyopentheCH-SET menu. The < ST>channelwillbe
selected.
3) Press the SELECT switch RIGHT or LEFT to choose the desired channel you
would like to change function Programming Values for.
Changing Function Programming Values:
1) Afterselectingthedesiredchannel,scrollUPorDOWNtohighlightthefunction
Programming Value you would like to change.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosetheselectedfunction
Programming Value.
3) Press the ENTER key, then repeat steps 1 and 2 to change any other desired
function Programming Values.
Certain function Programming Values may not be displayed in the CH-SET menu because they haven't been selected in
thespecificfunction'sProgrammingMenu.Forexample,theCURVEEXPfunctionProgrammingValuemaybedisplayed
inthe CH-SET menu,butifyouwanttochangetheCURVE ARCfunctionthroughtheCH-SETmenu,youwillneed to first
choosetheARCfunctionintheCURVEmenufirst.TheCURVEARCfunctionProgrammingValuewillthenbeabletochanged
through the CH-SET menu.
Function Programming Values changed from within the CH-SET menu are duplicated in the specific function's Programming
Menu and vice-versa.
CUSTOM MENU OVERVIEW
CUSTOM
CH-SET
PG. 104
MENU
PAGE #
MENU DESCRIPTION
Adjust Programming Values for Common Functions in One Convenient Location
ThefollowingProgrammingMenusareavailablewithintheCUSTOMmenu:
Channels and function Programming Values will vary depending on the current Car Type selected. In addition, you're
unabletoselectachannelifitdoesn'tsupportthecurrentlyhighlightedfunction.Forexample,AUX1andAUX2don't
supportDualRate,soyoucan'tselectAUX1orAUX2whenD/Rishighlighted.
Adding Programming Menus to the CUSTOM Menu:
ManyProgrammingMenuscanbeAddedtotheCUSTOMmenuquicklyandeasily.Thisallowsyouto
storeandthenaccessyourmost-usedProgrammingMenusallinoneplacewithintheCUSTOMmenu.
NotallProgrammingMenuscanbeaddedtotheCUSTOMmenu.IfaProgrammingMenucanbeaddedtotheCUSTOM
menu,'C'ENTRYwillbedisplayedintheMessageDisplayWindowwhenyouhighlighttheProgrammingMenu.