EXZES ZZ Radio System Manual

107
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Transmitter does not control model
Servo(s) and/or ESC don't operate at all or
operate erratically
Direction of travel shown on Servo Monitor is
different from control input travel
Can't control underscore when changing Model
Name,UserNameetc
Telemetry Data doesn't record when Lap Timer
is Started
Can't clear Lap Timer
Steering Control Stick and/or Throttle Control
Stick won't center
Steering Control Stick, Throttle Control Stick
and/or Auxiliary Lever controls not centered or
otherwise not working as expected
UnabletoprogramtheCodeAuxfunction
Cannot Name or rename Model Templates
Telemetry Assign function does not work
Transmitter vibrates under certain conditions
Can't turn C-Mixes and/or T-Mixes ON or OFF
during use
Some functions, such as OFFSET and TH-HOLD
not functioning
Safety Link Number doesn't match
selected model
No RF Signal from transmitter
Transmitter in RECEIVER Mode
Using incorrect Channel Response
Mode setting
This is normal
Cursor is Active in Character Select
screen
Telemetry Data Recording function
turned OFF
Telemetry system turned OFF
This is normal
Spring tension set too loose
Controls require Calibration
Selected Car Type doesn't support a free
AUXchannel(e.g.CarTypeX)
This is normal
Telemetry system turned OFF
External device not paired
External device not compatible
Not using compatible receiver
Vibration Alerts turned ON
C-Mixes and/or T-Mixes not Assigned to
different Racing Modes
Function not Assigned to a Push-Button
Switch
Choose correct model that matches receiver or Bind
model again with correct Safety Link Number
Transmitter is in DISPLAY Mode and not actually
turned ON
TurnDISPLAYModeOFF,thenturntransmitterON
UsecorrectChannelResponseModesettingbased
on the type of servos and/or ESC you're using
Direction of travel displayed will vary depending on
Servo Reversing settings
PressBACKkeytore-gaincontrolofunderscore
Turn Telemetry Data Recording function ON
Turn Telemetry system ON
Lap Timer will clear when you Start the Lap Timer again
Tighten spring tension
Calibrate control End Points and Neutral positions
using Calibration function
SelectaCarTypethatfeaturesoneormorefreeAUX
channels
Model Templates are saved using the current Model
Name
Turn Telemetry system ON
Pair external device to system
UsecompatibleSanwaexternaldevice
UseSanwa2.4GHzFH4Treceiver
Turn Vibration function OFF for the desired Alerts
Assign one C-Mix or T-Mix with desired Rate values
to one Racing Mode and another C-Mix or T-Mix with
0% Rate values to a different Racing Mode. Switch
between the two Racing Modes to the turn the Mixes
ON (one with Rate values) and OFF (one without).
These types of functions must be Assigned to a
Push-Button Switch to be turned ON and OFF.
PROBLEM
CAUSE SOLUTION
ST
TH/BR
----
----
ST
TH
AUX1
AUX2
ST
TH/BR
AUX1
AUX2
ST
TH/BR
AUX1
AUX1
ST
TH
BR
----
ST
TH
BR
AUX
ST
TH
BR
AUX
ST
TH
BR
AUX
ST
TH/BR
BR2
----
ST
TH
BR2
AUX
ST
TH/BR
BR2
AUX
ST
TH/BR
BR2
AUX
ST
TH
BR
BR2
ST
TH
BR
BR2
ST
TH
BR
BR2
ST
TH
BR
BR2
ST
TH/BR
ST
----
ST
TH
ST
AUX
ST
TH/BR
ST
AUX
ST
TH/BR
ST
AUX
ST
TH/BR
ST
----
ST
TH
ST
AUX
ST
TH/BR
ST
AUX
ST
TH/BR
ST
AUX
ST
TH
ST
BR
ST
TH
ST
BR
ST
TH
ST
BR
ST
TH
ST
BR
ST
TH/BR
ST
BR2
ST
TH
ST
BR2
ST
TH/BR
ST
BR2
ST
TH/BR
ST
BR2
ST
TH/BR
----
----
ST
F/TH
R/TH
AUX
ST
TH/BR
TH/BR
AUX
ST
TH/BR
TH/BR
AUX
CH1
CH2
CH3
CH4
CH1
CH2
CH3
CH4
CH1
CH2
CH3
CH4
CH1
CH2
CH3
CH4
RACING MODE FUNCTIONS BY CAR TYPE REFERENCE
The tables below and on the next page shows the available Racing Mode functions by Car Type and channel.
TYP I
TYP II TYP III TYP IV TYP V TYP VI
TYP VII TYP VIII TYP IX TYP X
FUNCTION
TYPE
D/R
TRIM
CURVE
SPEED
ST
TH/BR
ST
----
ST
F/TH
ST
R/TH
ST
TH/BR
ST
TH/BR
ST
TH/BR
ST
TH/BR
REFERENCE