EXZES ZZ Radio System Manual

111
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Code Auxiliary: The Code Auxiliary function is used with SSL-compatible accessories, such as a Super Vortex series ESC, whose
Programming Parameters can be changed directly via the transmitter.
Compensation Mixing:UsedtocreateyourowncustomMixesthatallowyoutocontrolanynumberofdesiredfunctionsin
different combinations.
Countdown Timer: This timer is used to notify you of your model’s running time. For example, you can set the Countdown Timer
to alert you when it's time to refuel.
Crab Steering:UsedwithFourWheelSteering,bothFrontandRearwheelspivotrightandlefttogether.Alsoreferredtoas
Parallel Steering.
Cursor Indicator:IndicatesontheTELEMETRYscreenthecurrentpositionoftheCursorwhenreviewingTelemetryData.
Data Point Scale:IndicatesontheTELEMETRYscreenthetimeinSecondsbetweenrecordedTelemetryDataPoints.
Dig:UsedmostlyinRockCrawlingandinconjunctionwiththeMotoronAxlefunction,powertotheRearmotorisreducedor
turned OFF while keeping full control of the Front motor.
Digital Trim Memory: Allows the transmitter to store Trim values in its memory. Any amount of Trim that you set during use using
the Trim Switches is automatically stored in memory for that specific channel and for that specific model. The Trim values for each
model will automatically be loaded when the transmitter is turned ON.
Direct Model Select: Allows you to choose up to three different models that can be selected when turning the transmitter ON.
Simply press a key while turning the transmitter ON and the Programming Data for your favorite model will load automatically.
Direction/Max/Min Indicators:IndicatesontheTELEMETRYpagesControlMovementDirectionorProgrammedMaximumand
MinimumTelemetryDatavalues,dependingonthecurrentTELEMETRYpagebeingdisplayed.
Display Key: Turns the transmitter's LCD Screen ON without actually turning the transmitter ON. This allows you to check and/or
change programming options without actually turning the transmitter ON.
Dual Rate: Allows you to change the control authority of the Steering, Throttle High Side and Throttle Brake Side by changing the
amount of servo travel relative to control input.
Dual Rate Display: Displays the current Dual Rate percentage value of channels that Dual Rate can be programmed for. Channels
displayed will vary based on the currently selected Car Type.
Earphone Jack:Usedwithearphones(notincluded)tohearaudiblekeytones,alertsandalarms.
Elapsed Time:DisplaysontheTELEMETRYscreenthecurrentpositioninTimeoftheCursorIndicatorwithinthecurrentTelemetry
Data Log.
End Point Adjustment:Usedtoadjustthedesiredamountofservotravelinbothdirectionsindependently.Thismakesitpossible
to balance servo travel in both directions.
Enter Key: Opens the Selected menu or programming option. Press and HOLD to reset the Selected programming option to its
default value.
Exponential: Allows you to vary the amount of servo travel in relation to the movement of the Steering Control Stick and Throttle
Control Stick (or in some cases, the Auxiliary Dial and/or the Auxiliary Lever) near the Neutral positions to change the way those
functions react to control movement.
Fail Safe: Automatically moves the servos to a predetermined position in the event that the signal between the transmitter and the
receiver is interrupted, whether due to signal degradation or low transmitter battery.
Feeling: Allows you to adjust the Response Time of the Steering and Throttle channels to fine-tune the sensitivity of these controls.
Some users may find that the Response Time is in some cases too fast, therefore, it's adjustable to suit the driver's driving style,
Car Type and track conditions.
FH3 Modulation: Frequency Hopping 3rd generation FHSS technology. FH3 Modulation is used in newer-generation SANWA
radio control systems, such as the M11X and MX-3X.
FH4/FH4T Modulation: Frequency Hopping 4th generation FHSS technology. FH4 Modulation is the latest SANWA 2.4GHz
frequency modulation. FH4T frequency modulation is the same, but supports Telemetry.
FHSS: Frequency Hopping Spread Spectrum. FHSS is a Modulation Type which transmits data across the entire frequency
spectrum by transmitting data on different channels at an extremely fast interval.
Firmware:Thetransmitter'soperatingsoftware.YoucanchecktheFirmwareversionintheSYSTEM>INFORMATIONmenuand
even update the Firmware if new Firmware becomes available.
Four Wheel Steering Mixing:UsedtocontroleithertheFrontorRearsteeringindependently,orMixtheFrontandRearsteering
so that they can be used together. Front or Rear Independent Steering, Parallel Four Wheel Steering and Tandem Four Wheel
Steering options are available.
Goal Time:UsedinconjunctionwiththeLapTimer,theGoalTimeis designed to alert you when you reach the maximum desired
elapsed time during your race or during practice.
GLOSSARY OF TERMS REFERENCE
REFERENCE