EXZES ZZ Radio System Manual

114
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
GLOSSARY OF TERMS REFERENCE
Status Screen: Displays information about the transmitter and is the base from which you access other Programming Menus.
Steering Output Display:DisplaysontheTELEMETRYscreenthecurrentpositionoftheSteeringchannelasapercentageof
Steering Control Stick travel.
Steering Response Mode LED: Displays the currently Active Steering Response Mode. The color of the LED will vary depending
on which of the three Response Modes is Active.
Steering Spring Tension Adjustment Screw:UsedtoadjustthespringtensionoftheSteeringControlSticktobestsuitthefeelof
the user.
Step Value: A preset amount that the servo will travel when a Trim Switch is pressed once. The Step value can be adjusted so
that the servo either moves more or moves less when a Trim Switch is pressed.
Stroke: Determines the amount of Brake that's applied automatically when the Anti-Lock Braking function Activates.
Sub-Trim:UsedtocorrecttheNeutralTrimsettingfortheservos,makingitpossibletocentertheTrimSwitcheswhileensuring
the servo horns remain centered.
Suppression Capacitor: Primarily used on brushed electric motors, a suppression capacitor helps eliminate electrical noise that
could interfere with the operation of your radio control system.
System Indicators: Indicates on the LCD screen transmitter status information.
Tandem Steering:UsedwithFourWheelSteering,theFrontwheelspivotoppositetotheRearwheels.
Telemetry: A connection between the transmitter and receiver that transfers Sensor Data from the receiver to the transmitter that
canbeviewedinreal-timeontheTELEMETRYscreen.
Telemetry Alert Alarm: The Telemetry Alert alarm will sound when the Telemetry 1 and/or Telemetry 2 Data value reaches the
programmed Telemetry Alert value.
Telemetry Alert Value: The programmed value at which a Telemetry Alert with sound.
Telemetry Assign: Allows the use of a remote external device (available separately) to control many transmitter functions. This
allows a driver helper or a pit crew member to remotely control transmitter functions, allowing you to concentrate more on driving.
Telemetry Mixing: Similar to Compensation Mixing, you're able to create custom Mixes using Telemetry Data or Telemetry Alerts.
Telemetry Screen: DisplaysTelemetryData,suchasRPMorSpeed,Temperature,ReceiverVoltageandmore.UsetheSELECT
switch to switch between ALL and LAP, ST, TH, RPM, VOLT, TLM1 (TMP1) and TLM2 (TMP2) pages.
Telemetry Signal Indicator: Indicates on the LCD screen the current signal strength of the Telemetry connection between the
transmitter and receiver.
Telemetry Switch:Usingaremoteexternaldevice(availableseparately)tocontrolmanytransmitterfunctions.
Temperature 1 Display: In the default configuration, displays the current temperature in Fahrenheit or Celsius of the Temperature
Sensor plugged into the TEMP1 Sensor Port in the receiver. The tick mark indicates the current temperature relative to the
programmed Maximum and Minimum Temperature values. This label can be changed if using different Telemetry accessories.
Temperature 2 Display: In the default configuration, displays the current temperature in Fahrenheit or Celsius of the Temperature
Sensor plugged into the TEMP2 Sensor Port in the receiver. The tick mark indicates the current temperature relative to the
programmed Maximum and Minimum Temperature values. This label can be changed if using different Telemetry accessories.
Throttle Bias: Allows you to change the ratio between Throttle High Side servo travel and Throttle Brake Side servo travel.
Throttle Hold: Moves the Throttle servo to a fixed position, either toward the High Side or the Brake Side, and is used primarily
with glow- or gas-powered models.
Throttle Offset: Allows you to shift the Neutral position of the throttle servo, either toward the High Side or the Brake Side.
Throttle Output Display:Displays onthe TELEMETRY screen the current position of the Throttlechannel asa percentageof
Throttle Control Stick travel.
Throttle Response Mode LED: Displays the currently Active Throttle Response Mode. The color of the LED will vary depending
on which of the three Response Modes is Active.
Throttle Control Stick: Controls the speed of the model, both forward and backward, or the model's Brake.
Throttle Spring Tension Adjustment Screw: UsedtoadjustthespringtensionoftheThrottleControlSticktobestsuitthe
feel of the user.
Trim Display: DisplaysthecurrentpositionofchannelTrim.TrimIndicators(ST,AUX1,etc.)displayedwillvarybasedonthe
currently selected Car Type.