EXZES ZZ Radio System Manual

13
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Scrolls between STATUS, ASSIGN and TELEMETRY screens*
Scrolls the Programming Cursor RIGHT or UP and LEFT or
DOWN. Increases or Decreases Programming Values.
PROGRAMMING KEY NAME FUNCTION
Push-Button Rotary Dial
(Push ENTER)
Opens the Selected menu or programming option. Press and
HOLD to reset the Selected programming option to its default
value.
BACKKey
Returns to the previous menu. Repeatedly press to return to the
STATUSscreen.
Push-Button
Rotary Dial
(ScrollUP/DOWN)
Navigating through the various Display Screens, Programming Menus and changing Programming Values is accomplished
usingtheENTERkey(Push-ButtonRotaryDial),theSELECTswitchandtheBACKkey.
PRO TIP: While navigating Programming Menus and changing Programming Values, keep the following in mind: to choose
amenufromtheSTATUSscreen,usetheSELECTswitch.Toopenamenu,presstheENTERkey.Tochooseanoption
toprogram,scrollUPorDOWNtohighlightthedesiredoption,thenpresstheENTERkey.Thehighlightedoptionwillflash,
indicating the Programming Value can be changed. Once you've changed the Programming Value, press the ENTER key again
orpresstheBACKkeyandthehighlightedoptionwillstopflashing,indicatingyoucanscrollUPorDOWNtohighlightanother
programming option. To reset a programming option to its default value, highlight the option and press the HOLD the ENTER key.
UsedtoSelectvariousmenus*.Inaddition,theSELECTswitch's
function will vary depending on the menu chosen and will be
indicated in the menu's Message Display Window.
In the default configuration, when you turn the EXZES ZZ ON, the transmitter will start-up and display the BOOT screen tem-
porarily,thendisplaytheSTATUSscreen.
SELECT Switch
BOOT Screen: The BOOT screen is displayed when the transmitter is turned ON. The BOOT screen can be disabled. For more
information, see the INFORMATION Menu section on pages 65 and 66.
STATUS Screen: The STATUS screen is displayed after the BOOT screen and displays important information about the
transmitter.It'salsothebasefromwhichyouaccessotherProgrammingMenus.Formoredetailedinformation,seetheSTATUS
Screen Overview section on the next two pages.
STATUS Screen
(
BASIC Mode OFF
)
BOOT Screen
PROGRAMMING KEYS OVERVIEW AND FUNCTIONS GENERAL
DISPLAY SCREENS OVERVIEW GENERAL
*BASICModeMustBeTurnedOFF.
GENERAL