EXZES ZZ Radio System Manual

14
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Usetheinformationinthissectiontofamiliarizeyourselfwiththelayoutanddifferentindicatorsanddisplaysthatcomprisethe
STATUSscreen.TheSTATUSscreendisplays all pertinent information, such as the Model Name, Modulation Type, Timer,
Voltageandmuchmore.TheSTATUSscreenwillalwaysbedisplayedaftertheBOOTscreenunlessyouchangethatoptionin
theSYSTEM>BOOTmenu.Formoreinformation,seetheINFORMATIONMenusectiononpages65and66.
Model Number Model Name
Voltage Indicator
Telemetry Signal Indicator
Modulation Type Indicator
On-Time Indicator
Audio Indicator
RF Indicator
Trim Display
Dual Rate Display
Mode Display
Car Type Indicator
Racing Mode Indicator
Trim Display
DISPLAY SCREENS OVERVIEW GENERAL
ASSIGN Screen: The ASSIGN screen displays the functions that are currently Assigned to the Push-Button Switches, the Trim
Switches, the Auxiliary Dial and the Auxiliary Lever, all in one convenient location.
TELEMETRY Screen: TheTELEMETRYscreendisplaysTelemetryData,suchasRPMorSpeed,Temperature,ReceiverVoltage
andmore.UsetheSELECTswitchtoswitchbetweenALLandLAP,ST,TH,RPM,VOLT,TMP1*andTMP2*pages.
*Defaultnameandfunction.CanberenamedifusingdifferentTelemetryaccessories(availableseparately).Formoreinformation,
see your local Sanwa retailer.
Telemetry integration requires the use of an Sanwa 2.4GHz FH4T Telemetry-capable surface receiver or SSL-compat-
ible ESC (e.g. Super Vortex series ESC). Steering and Throttle Output and Lap Times can still be viewed when used with
non-Telemetry capable receivers.
STATUS Screen Overview Diagram Descriptions:
Audio Indicator: IndicateswhetherAudibleKeyTonesandTransmitterAlarmsareMutedornot.
Car Type Indicator: Indicates the current Car Type selected.
Dual Rate Display: Displays the current Dual Rate percentage value of channels that Dual Rate can be programmed for. Channels
displayed will vary based on the currently selected Car Type.
Mode Display: Displays any special Programming Modes that are Active, such as Throttle Offset or Anti-Lock Braking.
Model Name: Displays the Name of the currently selected Model.
Model Number: Displays the number of the currently selected Model.
Modulation Type Indicator: Indicates the current Modulation Type that the transmitter is set to.
TELEMETRY Screen
ASSIGN Screen
From the STATUS screen, use the Push-Button Rotary Dial to scroll UP or DOWN to display the ASSIGN and TELEMETRY
screens.ToreturntotheSTATUSscreen,eitherscrolltoitorpresstheBACKkey.
BASICMode mustbeturnedOFFtoviewtheASSIGN andTELEMETRYscreens.ForinformationaboutturningBASIC
Mode ON and OFF, see the INFORMATION Menu section on pages 66 and 67.
SCROLL
STATUS Screen Overview Diagram: