EXZES ZZ Radio System Manual

EXZES ZZ

2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE

Telemetry System with Sanwa Synchronized Link Support

Eachofthemenusdescribedintheprevioussectionallsharethesamebasiclayoutasillustratedbelow.Usethisinformationto

familiarize yourself with the layout and the information presented.

Model Number

System Indicators

Menu Programming Display

Current Programming Menu

Message Display

Racing Mode Indicator

Next Programming Menus

Current Main Menu

Menu Header

Current Main Menu:DisplaysthecurrentlyActivemainmenu,eitherBASIC,SYSTEM,SETUP,RACINGorCUSTOM.

Current Programming Menu: Displays the currently Active Programming Menu.

Menu Header: Displays the name of the currently Active Programming Menu. In some cases, programming options may also be

found within the Menu Header.

Menu Programming Display: Displays all programming information pertinent to the currently Active Programming Menu.

Message Display:DisplaysdifferentProgrammingKeyfunctionsbasedonthecurrentlyActiveProgrammingMenu.Formore

information, see the illustrations and descriptions below.

Model Number: Displays the number of the currently selected Model.

Next Programming Menus: Displays the next two Programming Menus within the current main menu.

Racing Mode Indicator: Indicates which Racing Mode (R1 through R5) is Active or Inhibited.

System Indicators: Indicates current transmitter status information as described in the Display Screens Overview section on

pages 13 through 15.

MENUS OVERVIEW GENERAL

The function of the SELECT switch and the ENTER key will vary depending on the specific Programming Menu displayed.

In This Menu Style:

The SELECT switch Saves or Removes the current Programming Menu from the

CUSTOMmenu.

TheENTERkeyopensthehighlightedProgrammingMenu.ScrollUPandDOWNto

choose different Programming Menus.

In This Menu Style:

The ENTER key opens a Sub-Menu. Scroll UP and DOWN to choose different

Sub-Menus.

In This Menu Style:

The SELECT switch scrolls RIGHT or LEFT to Select different channels.

Scroll UP and DOWN to choose the desired function Programming Value, then

press the ENTER key change the Programming Value.