EXZES ZZ Radio System Manual

20
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
IfBASICModeisturnedOFF,presstheSELECTswitchtohighlighttheSYSTEMmenu.PresstheENTERkeyasecond
timetoopentheSYSTEMmenu,thenscrollUPorDOWNtohighlighttheINFORMATIONmenu.
BASIC MODE MENU OVERVIEW BASIC
The EXZES ZZ features a BASIC Mode that simplifies transmitter use. The ac-
companying BASIC menu contains some of the more common, general-use Pro-
gramming Menus that a user will require for basic programming. When BASIC
Mode is turned ON, not only are these various Programming Menus in one easy
place to find them, so you don't need to spend time finding them in one of the
otherfourmenus, but it also removes the TELEMETRY and ASSIGN screens to
simplify transmitter use.
TURNING BASIC MODE ON AND OFF BASIC
1) PresstheENTERkeyto open theBASICmenu,thenscroll UP or DOWNto
highlight the INFORMATION menu.
2) Press the ENTER key to open the INFORMATION menu. The cursor will default
toONTIME>XX:XX.
3) ScrollUPorDOWNtohighlightBASIC>ONorBASIC>OFF.
4) PresstheENTERkey,thenscrollUPorDOWNtoselectthedesiredoption,eitherONorOFF.WhenONisselected,BASIC
Mode will be turned ON and when OFF is selected, BASIC Mode will be turned OFF.
To access the various BASIC menu Programming Menus, turn the transmitter ON, then press the ENTER key to open the
BASIC menu.
ScrollUPorDOWN to highlight the desired Programming Menu, then press the ENTER key to open that menu.
BASIC
SELECT
BIND
D/R
EPA
CURVE
SPEED
TRIM
SUB TRIM
REV
F/S
ALB
NAME
COPY
INFORMATION
PG. 22
PG. 28
PG. 83
PG. 67
PG. 84
PG. 89
PG. 83
PG. 68
PG. 69
PG. 74
PG. 90
PG. 23
PG. 24
PG. 65
MENU
PAGE #
MENU DESCRIPTION
Select Your Model
Bind, Choose Modulation Type, Safety Link Number and Channel Response Mode
Adjust Steering, Throttle and Brake Dual Rates
Adjust Channel End Points to Balance Servo Travel
Adjust Channel Exponential, Adjustable Rate Control (ARC) and Curves
Adjust Servo Speed in the Forward and the Return to Neutral Directions
Adjust Servo Trim, Including Auxiliary Channel Trim
Adjust Servo Centering to Center the Servo Horns
Change the Direction of Servo Travel
Program Fail Safe Settings
Turn Anti-Lock Braking ON or OFF and Choose Anti-Lock Braking Options
Name Your Model
Copy Model Programming Data From One Model to Another
View Firmware Version, Change Boot Screen, Turn BASIC Mode ON and OFF, and More
The following Programming Menus are available within the BASIC menu: