EXZES ZZ Radio System Manual

21
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
BASICModemustbeturnedOFFtoaccesstheSYSTEMmenu.Formoreinformation,seetheTurningBASICModeON
and OFF section on the previous page. In addition, depending on the Car Type chosen, some Function Programming Value
Names may differ from those shown in this section.
The Type function allows you to quickly set up the transmitter's Mixing options based on the type of model you're driving.
Common templates for Car or Truck and Crawler Car Types are provided. For example, if your Crawler features separate
Front and Rear Steering servos, choosing one of the Crawler Car Types will automatically program the transmitter for Four
WheelSteering.TheTYPEmenuwillalsodisplaywhatreceiverchannelstoplugtheservosintosincethiswillvarydependingon
the Car Type chosen. This takes the guess-work out of setting up your model.
WARNING:TYPEmenuselectionsaredesignedtobeusedwhensettingupanewmodelandshouldbedonepriorto
making any programming changes to your model. When the Type function is used to change the Car Type, all Programming
Data (including custom Programming Data) for the current model will be RESET!
ToaccessthevariousSYSTEMmenuProgrammingMenus,turnthetransmitter
ON, press the SELECT switch to highlight the SYSTEM menu, then press the
ENTERkeytoopentheSYSTEMmenu.
ScrollUPorDOWN to highlight the desired Programming Menu, then press the
ENTER key to open that menu.
Choosing a Car Type:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the TYPE
menu.
SYSTEM MENU OVERVIEW SYSTEM
TYPE MENU
{
CAR TYPE TEMPLATES
}
SYSTEM
SYSTEM
TYPE
MODEL
DMS
BIND
SERVO
ASSIGN
BUZZER
VIBRATOR
LCD
AUX TYPE
TRIM TYPE
TH TYPE
CALIBRATION
BATT
LOG SETUP
USER NAME
PC LINK
INFORMATION
PG. 21
PG. 22
PG. 28
PG. 28
PG. 30
PG. 31
PG. 40
PG. 41
PG. 42
PG. 44
PG. 45
PG. 45
PG. 46
PG. 48
PG. 50
PG. 60
PG. 61
PG. 65
MENU
PAGE #
MENU DESCRIPTION
Choose Car Type Templates From Normal to Crawler
Model Select, Model Name, Model Copy, Model Clear, Model Sort and Model Templates
Direct Model Select - Use to Quickly Select Your Favorite Models
Bind, Choose Modulation Type, Safety Link Number and Channel Response Mode
Use the Servo Monitor to View Servo Travel Digitally
Assign Functions to the Switches, Rotary Dial, Auxiliary Lever and Telemetry
Turn Audible Key Tones and Alarms ON and OFF and Control Their Pitch and Volume
Turn Vibrating Alerts and Alarms ON and OFF
Adjust the Contrast, Brightness and Display Mode of the LCD Screen
Choose the Operating Mode of the Two Auxiliary Channels
Choose the Desired Servo Trim Type - Either Parallel or Centered
Choose the Desired Throttle Bias Type
Calibrate Steering, Throttle and Auxiliary Lever Controls
Specify Transmitter Battery Low Voltage Alert and Limit Alarms
Program TELEMETRY Screen and Telemetry Recording Options
Change the Name Displayed Above the EXZES ZZ Logo on the STATUS Screen
Save Telemetry Logs, Save and Load Model Programming and Update Firmware
View Firmware Version, Change Boot Screen, Turn BASIC Mode ON and OFF, and More
The following Programming Menus are available within the SYSTEM menu: