EXZES ZZ Radio System Manual

22
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Choosing a Car Type, Continued:
2) PresstheENTERkeytoopentheTYPEmenu.ThecursorwilldefaulttoCAR
TYPE>I.
3) PresstheENTERkey,thenscrollUPorDOWNtoSelectthedesiredCarType
asshowninthetablebelow.TheTYPEMenuProgrammingDisplayshowsthe
Car Type (Normal or Crawler) and which servos should be plugged into what
receiverchannelports.Forexample,CARTYPE>VIIisaNormalCarTypethat
might be used for a 1/5th scale off-road gas buggy that uses two Steering
servos and a separate second Brake servo. In this example, the Left Steering
servo should be plugged into channel 1, the Right Steering servo should be
plugged into channel 3, the Throttle/first Brake servo should be plugged into
channel 2 and the second Brake servo should be plugged into channel 4.
4) PresstheENTERkey.MODELDATACLEAR?NO/YESwillbedisplayed.
5) ScrollUPorDOWNtohighlightYES,thenpresstheENTERkey.EXECUTING
will be displayed and the current Model Programming Data will be reset with
the Selected Car Type options.
If you want to go back and change the Car Type or you don't want to
createthenewCarTypeforanyreason,chooseNOorpresstheBACK
keypriortoEXECUTING.
Yourparticularmodelmaynotrequiretheuseofallfourchannels,eventhougheachCarTypetemplatemayshow
them. In this case, those channels will simply go unused.
The MODEL menu allows you to Select different models, Name your saved models, Copy Programming Data from one model
to another model, Clear Programming Data from one or more models and Sort your saved models into a Custom List. A Model
Template function allows you to store up to five Pre-Programmed Data Templates that allow you to more easily set up
the transmitter for models that require more time-consuming and complicated programming. Two Model Templates are
factory-programmed for use with the Super Vortex ZERO and Super Vortex Type-D ESCs to get you started.
The Model Select function allows you to load the Programming Data for the particular model you wish to drive. The MODEL
SELECT menu displays the currently Selected Model, along with a list of available models that can be Selected. The current
Modulation Type and Car Type of each model is also displayed. Programming Data for up to 50 different models can be stored
in the transmitter's memory.
TYPE MENU
{
CAR TYPE TEMPLATES
}
SYSTEM
MODEL MENU
{
SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE
}
SYSTEM
Model Select
Selecting a Model:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheMODEL
menu.
CH 1
CH 2
CH 3
CH 4
CH
TYP I
ST
TH+BR
AUX1
AUX2
TYPE
TYP II TYP III TYP IV TYP V TYP VI TYP VII TYP VIII TYP IX TYP X
ST
TH
BR
AUX
ST
TH+BR
BR2
AUX
ST
TH
BR
BR2
L-ST
TH+BR
R-ST
AUX
L-ST
TH
R-ST
BR
L-ST
TH+BR
R-ST
BR2
F/ST
TH+BR
R/ST
AUX
ST
F/TH+BR
R/TH+BR
AUX
F/ST
F/TH+BR
R/ST
R/TH+BR
ST=Steering•TH=Throttle•BR=Brake•BR2=Brake2•R-ST=Right•L-ST=Left•R/STorR/TH=Rear•F/STorF/TH=Front
This table shows the various channel functions based on the selected Car Type: