EXZES ZZ Radio System Manual

25
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
MODEL MENU
{
SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE
}
SYSTEM
5) PresstheENTERkey.MODELCOPYOK?NO/YESwillbedisplayed.ScrollUP
orDOWNtohighlightYES,thenpresstheENTERkey.
All Model-specific Programming Data, including the Model Name will
be copied to the highlighted model. If you want to go back and change
models or you don't want to Copy the Programming Data for any reason,
chooseNOorpresstheBACKkeypriortoEXECUTING.
6) EXECUTEDwillbedisplayedandthemodelyoujustcopiedProgramming
Data TO will be highlighted in brackets and the top of the Model Copy List.
Copying Model Programming Data, Continued:
3) PresstheENTERkeytoopentheCOPYmenu.Thecurrentlywillbedisplayed
in brackets above the Model Copy List.
4) ScrollUPorDOWNwithintheModel Copy List to highlightthemodelyou
would like to copy the current Model's Programming Data TO.
Model Clear
The Model Clear function allows you to reset model-specific Programming Data for the currently Selected Model back to the
Factory Default settings. Make sure that prior to using the Model Clear function, you first Select and load the desired model you
want to clear the Programming Data for, using the Model Select function.
WhentheModelClearfunctionisEXECUTED,allcustomProgrammingDataforthecurrentlySelectedModelwillbereset
to the Factory Default settings!
Clearing Model Programming Data:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheMODEL
menu.
2) PresstheENTERkeytoopentheMODELmenu,thenscrollUPorDOWNto
highlight the CLEAR menu. The currently Selected Model will be displayed.
3) PresstheENTERkey. MODEL CLEAROK? NO/YES will bedisplayed. Scroll
UPorDOWNtohighlightYES,thenpresstheENTERkey.EXECUTEDwillbe
displayed and all Programming Data for the currently Selected Model will be
reset to the Factory Default settings.
If you want to go back and change models or you don't want to Clear
theProgrammingData for any reason, choose NOorpresstheBACK
keypriortoEXECUTING.
SYSTEM