EXZES ZZ Radio System Manual

26
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
MODEL MENU
{
SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE
}
SYSTEM
Model Sort
The Model Sort function allows you to change how your models are displayed in the Model Select List by allowing you to swap
the currently Selected Model with other models. For example, you might want to Sort your models so that your most frequently
used models are at the top of the Model Select List, or you might want to Sort your
models by type, such as crawlers, on-road, etc.
Sorting Models:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheMODEL
menu.
2) PresstheENTERkeytoopentheMODELmenu,thenscrollUPorDOWNto
highlight the SORT menu.
3) Press the ENTER key to open the SORT menu. The currently Selected Model
will be displayed in brackets above the Model Sort List and the first model in
the Model Sort List will be highlighted.
4) Scroll UP or DOWN within the Model Sort List to highlight the model you
would like to swap the currently Selected Model with and move to the top
of the Model Sort List. For example, the currently Selected Model is M01.
Highlight M02 to swap M01 with M02 and move it to the top of Model Sort List.
5) PresstheENTERkey.MODELSORTOK?NO/YESwillbedisplayed.ScrollUP
orDOWNtohighlightYES,thenpresstheENTERkey.
If you want to go back and choose a different model or you don't want
toSorttheforanyreason,chooseNOorpresstheBACKkeypriorto
EXECUTING.
6) EXECUTED will be displayed and the model you highlighted (i.e. M02) will
be swapped with the currently Selected Model and moved to the top of the
Model Sort List.
7) Repeat steps 4 through 6 to continue Sorting Models by swapping with the
currently Selected Model. To swap with a different model, you must Select
that desired model using the Model Select function first. For more information,
see the Model Select section on pages 22 and 23.
Model Template
The Model Template function allows you to store up to five downloaded Pre-Programmed Model Templates that allow you
to more easily set up the transmitter for models that require more time-consuming and complicated programming. Two Model
Templates are factory-programmed for use with the Super Vortex ZERO and Super Vortex Type-D ESCs to get you started. If
your model uses one of these ESC's, you can Copy the desired Model Template to the Selected Model and the Auxiliary Type and
CODEfunctionswillalreadybeprogrammedforyou.ModelTemplatescanbeSavedandLoadedusingthePCLINKfunction.
Selecting a Model:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheMODELmenu.
2) UsingtheModelSelectfunction,selectthemodelyouwouldliketocopyTemplateProgrammingDatato.Formore
information, see the Model Select section on pages 22 and 23.