EXZES ZZ Radio System Manual

27
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
MODEL MENU
{
SELECT, NAME, COPY, CLEAR, SORT AND TEMPLATE
}
SYSTEM
Copying a Model Template:
1) FromwithintheMODELmenu,scrollUPorDOWNtohighlighttheTEMPLATE
menu.
2) Press the ENTER key to open the TEMPLATE menu. The Template List will be
displayed and the currently Selected Model will be displayed in brackets at the
bottom of the Template List.
3) ScrollUPorDOWNwithintheTemplateListtohighlighttheModelTemplateyouwouldliketoCopytothecurrentlySelectedModel.
It'snotpossibletochangeModelTemplateProgrammingDataortheTemplateNamepriortoEXECUTING.However,
you can change the Model Name and Programming Data after copying the Model Template to the Selected Model.
The following two Model Templates are factory-programmed to get you started:
PRO TIP:UsingthePCLINKfunction,newModelTemplatescanbedownloadedfromtheInternet,savedtoyourPC,then
Loaded into the TEMPLATE menu. Model Templates can also be saved to your PC for later use or to archive them if you
have more than five Model Templates. In addition, model Programming Data, including the Model Name can be Saved as
a Model Template. This allows you to share Model Templates with other users. For more information, see the Saving Model
Templates section and the Loading Model Templates sections on pages 63 and 64, respectively.
Full Brake Rate
Drag Brake
Drive Feel
Drag Brake Feel
Brake Feel
Boost
Turbo
Power Mode
Model Name
Car Type
Aux Type 1
Aux Type 2
Code Aux 1
Code Aux 2
TEMPLATE T01
SP-Vortex ZERO
I
CODE
CODE
CODE1 F-BR-R>0
CODE2 N-BR-R>0
CODE3 DRV-F>0
CODE4 N-BR-F>16
CODE5 BR-F>0
CODE1 BOST-R>0
CODE2 TURBO>0
CODE3 PW-MOD>0
CODE4 CODE4>0
CODE5 CODE5>0
Throttle Response
Drag Brake
Drive Feel
Drag Brake Feel
Brake Feel
Boost
Rev Limiter
Active Throttle
Model Name
Car Type
Aux Type 1
Aux Type 2
Code Aux 1
Code Aux 2
TEMPLATE T02
SP-Vortex D
I
CODE
CODE
CODE1 TH-RES>0
CODE2 N-BR-R>0
CODE3 DRV-F>0
CODE4 N-BR-F>16
CODE5 BR-F>0
CODE1 BOST-R>0
CODE2 RE-LMT>0
CODE3 ACT-TH>0
CODE4 CODE4>0
CODE5 CODE5>0
When you Copy a Model Template to the Selected Model, that model's Programming Data will be overwritten.
4) Press the ENTER key. TEMPLATE MODEL OK? NO/YES will be displayed.
ScrollUPorDOWNtohighlightYES,thenpresstheENTERkey.EXECUTED
will be displayed and all Model Template Programming Data, including the
Template Name, will be copied to the Selected Model.
If you want to go back and choose a different Model Template or you
don't want to Copy the Model Template to the Selected Model for any
reason,chooseNOorpresstheBACKkeypriortoEXECUTING.
SYSTEM