EXZES ZZ Radio System Manual

28
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
DMS MENU
{
DIRECT MODEL SELECT
}
SYSTEM
2) PresstheENTERkeyto open the DMSmenu,thenscrollUPorDOWNto
highlight the Model Name adjacent to the DMS number you would like to
change.
SELECT switch LEFT controls DMS1, SELECT switch RIGHT controls DMS2
andtheBACKkeycontrolsDMS3.
3) PresstheENTERkey,thenscrollUPorDOWNtochoosethemodelyouwant
to be controlled by that particular Direct Model Select switch.
4) Repeat step 3 to Assign any other desired models to the remaining Direct
Model Select Switches.
BIND MENU
{
BINDING, MODULATION TYPE, SAFETY LINK AND RESPONSE MODE
}
SYSTEM
The BIND menu allows you to change the transmitter's Modulation Type, turn the Telemetry function ON and OFF, assign a Safety
Link Number to your model's receiver, change the Channel Response Mode and Bind the transmitter and receiver pair.
All settings are model-specific, so you can have different settings to suit different models.
The Modulation Type and Safety Link Number must be chosen prior to Binding the transmitter and receiver. If these op-
tions are changed after Binding, you will need to Bind the transmitter and receiver pair again for the changes to take affect.
**Make sure the Modulation Type you choose matches the Modulation Type of the receiver you're using!**
ThefollowingModulationTypes*areavailable:
FH3 - Select this Modulation Type when using Sanwa 2.4GHz FH3 surface receivers.
FH4T - Select this Modulation Type when using Sanwa 2.4GHz FH4 or FH4T surface receivers (default).
Changing the Modulation Type:
The Modulation Type function allows you to choose the transmitter Modulation Type. The Modulation Type should be changed to
match the receiver you're using. For example, if you use an Sanwa 2.4GHz FH3 surface receiver with your transmitter, you would
need to change the Modulation Type to FH3. The Modulation Type should be chosen prior to Binding the transmitter and receiver
pair.
*Modulation Type of FH3 and FH4T are illegal in EU market. For EU market, FH3E and FH4TE are available as Legal
Modulation Type.
IMPORTANT: Not all BIND menu functions are supported by all Modulation Types. Only supported functions will be displayed
once a Modulation Type is chosen. For example, the FH3 Modulation Type does not support Telemetry, Safety Link or the
SSR Channel Response Mode.
Changing Direct Model Select Models:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the DMS
menu.
The DMS function allows you to choose up to three different models that can be selected when turning the transmitter ON. Simply
press a key while turning the transmitter ON and the Programming Data for your favorite model will load automatically.
Using the Direct Model Select Function:
1) Make sure that the transmitter is turned OFF.
2) PressandHOLDtheSELECTswitchRightorLeft,orpressandHOLDtheBACKkeywhileturningthetransmitterON.The
Model Programming Data associated with either of those key presses will automatically load.