EXZES ZZ Radio System Manual

29
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
BIND MENU
{
BINDING, MODULATION TYPE, SAFETY LINK AND RESPONSE MODE
}
SYSTEM
4) Press the ENTER key. SET TO FH3? (or the Modulation Type you selected)
NO/YESwillbedisplayed.ScrollUPorDOWNtohighlightYES,thenpressthe
ENTER key.
If you want to go back and change the Modulation Type or if you don't
want to change the Modulation Type for any reason, choose NO or
presstheBACKkey.
Changing the Safety Link Number:
The Safety Link function is used to program a unique code to each receiver/model pair, preventing the transmitter from controlling
a model that it's not currently programmed for. This helps prevent a runaway model should you accidentally choose the wrong
Programming Data for the intended model.
The Safety Link Number should be chosen prior to Binding the transmitter and receiver pair. To make it easier to keep track
of what Safety Link Number goes to what model, we suggest making the Safety Link Number the same as the Model Number.
1) FromwithintheBINDmenu,scrolldowntohighlightSAFETYLINK>01.
2) PresstheENTERkey,thenscrollUPorDOWNtohighlightthedesiredSafety
Link Number.
SAFETYLINKsettingrangeis01to44.Thedefaultsettingis01.
Turning the Telemetry Function ON and OFF:
1) From within theBINDmenu,scrolldowntohighlightTELEMETRY>OFF.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredTelemetry
value, either ON or OFF.
TELEMETRYsettingrangeisONorOFF.ThedefaultsettingisOFF.
3) PresstheENTERkey.SETTO LINK No.02?(ortheSafetyLinkNumber you
selected)NO/YESwillbedisplayed.ScrollUPorDOWNtohighlightYES,then
press the ENTER key.
If you want to go back and change the Safety Link Number or if you don't
want to change the Safety Link Number for any reason, choose NO or
presstheBACKkey.
Changing the Modulation Type, Continued:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the BIND
menu.
2) PresstheENTERkeytoopentheBINDmenu.MODULATION>FH4Twillbe
highlighted.
3) PresstheENTERkey,thenscrollUPorDOWNtoselectthedesiredModulation
Type.
SYSTEM